Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › REAR VIEW MONITOR SYSTEM (for Navigation Receiver Type) › 2015.06–2020.08
RM27T0E _56 Audio / Visual / Telematics _053722 PARK ASSIST / MONITORING _0261010 REAR VIEW MONITOR SYSTEM(for Navigation Receiver Type) U

PARK ASSIST / MONITORING  REAR VIEW MONITOR SYSTEM(for Navigation Receiver Type)  TERMINALS OF ECU  


CHECK NAVIGATION RECEIVER ASSEMBLY


U170732E02
0.885,1.896 1.156,2.073 0.271,0.177 10 false H54 3.344,0.552 3.615,0.729 0.271,0.177 10 false H56 1.156,0.552 1.427,0.729 0.271,0.177 10 false H55

a.

Disconnect the H54 and H56 navigation receiver assembly connectors.


b.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specification
H54-3 (ACC1) - H54-7 (GND1) GR - BR Power source (ACC) Ignition switch off Below 1 V
Ignition switch ACC 11 to 14 V
H54-4 (+B1) - H54-7 (GND1) R - BR Power source (+B) Always 11 to 14 V
H54-7 (GND1) - Body ground BR - Body ground Ground Always Below 1 Ω
H56-1 (IG) - H54-7 (GND1) L - BR Power source (IG) Ignition switch off Below 1 V
Ignition switch ON 11 to 14 V


c.

Reconnect the H54 and H56 navigation receiver assembly connectors.


d.

Measure the voltage and waveform according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specification
H56-2 (REV) - H54-7 (GND1) R - W-B Reverse signal Ignition switch ON, shift lever in R 7.5 to 14 V
Ignition switch ON, shift lever not in R Below 1 V
H55-11 (CA+) - H55-23 (CGND) B - Shielded Power source Ignition switch ON 5.5 to 7.05 V
H55-12 (V+) - H55-23 (CGND) R - Shielded Display signal Ignition switch ON, camera lens not covered, displaying an image Pulse generation (See waveform 1)
Ignition switch ON, camera lens covered, blacking out screen Pulse generation (See waveform 2)
H55-23 (CGND) - Body ground Shielded - Body ground Shielded ground Always Below 1 V


e.
E265840E15
1.271,1.479 1.531,2.063 false 1.125,1.594 0.896,2.063 false 1.313,3.542 1.635,4.229 false 1.167,3.604 0.875,4.229 false 0.063,0.052 0.26,0.24 0.198,0.188 10 false *a 0.063,2.188 0.26,2.375 0.198,0.188 10 false *b 0.323,0.969 0.667,1.135 0.344,0.167 10 false GND 0.406,3.229 0.75,3.396 0.344,0.167 10 false GND 0.771,2.052 0.969,2.24 0.198,0.188 10 false *c 1.49,2.063 1.688,2.25 0.198,0.188 10 false *d 1.635,4.25 1.833,4.438 0.198,0.188 10 false *d 0.729,4.198 0.927,4.385 0.198,0.188 10 false *c

Using an oscilloscope, check the waveform.

i.

Waveform 1

Measurement Condition
Item Content
Terminal No. (Symbol) H55-12 (V+) - H55-23 (CGND)
Tool Setting 200 mV/DIV., 50 μs/DIV.
Condition Ignition switch ON, camera lens not covered, displaying an image

HINT:

The video waveform changes according to the image sent by the rear television camera assembly.



ii.

Waveform 2

Measurement Condition
Item Content
Terminal No. (Symbol) H55-12 (V+) - H55-23 (CGND)
Tool Setting 200 mV/DIV., 50 μs/DIV.
Condition Ignition switch ON, camera lens covered, blacking out screen

HINT:

The video waveform changes according to the image sent by the rear television camera assembly.


Text in Illustration
*a Waveform 1
*b Waveform 2
*c Synchronized Signal
*d Video Waveform