Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › WIDE VIEW FRONT MONITOR SYSTEM › 2015.06–2017.08
RM27T0E _56 Audio / Visual / Telematics _053722 PARK ASSIST / MONITORING _0261014 WIDE VIEW FRONT MONITOR SYSTEM D

PARK ASSIST / MONITORING  WIDE VIEW FRONT MONITOR SYSTEM  SYSTEM DESCRIPTION  


*1: for Navigation Receiver Type

*2: for Radio and Display Type


GENERAL


a.

This system has a front television camera assembly to display the front view of the vehicle on the navigation receiver assembly*1 or radio and display receiver assembly*2.


b.

This system consists of the following components:

i.

Parking assist ECU


ii.

Front television camera assembly


iii.

Steering pad switch assembly (wide view front and side monitor switch)


iv.

Navigation receiver assembly*1


v.

Radio and display receiver assembly*2


vi.

Spiral cable sub-assembly


vii.

Skid control ECU (brake actuator assembly)


viii.

Four wheel drive control ECU


ix.

ECM



c.

This system is equipped with a self-diagnosis system, which is operated from a designated window that appears on the display panel, just as in the navigation system or audio and visual system.



FUNCTION OF COMPONENTS


a.

The parking assist ECU controls the system by using information from the following components.

Item Function
Front Television Camera Assembly Generates a video feed showing the front side of the vehicle and transmits the video to the parking assist ECU.
Steering Pad Switch Assembly (Wide View Front and Side Monitor Switch) Operating the switch sends a signal to the parking assist ECU.
Parking Assist ECU
·

Turns the front television camera assembly on or off based on parameters such as the display settings, the wide view front and side monitor switch signal, the shift signal and the vehicle speed signal.

·

Display the wide view front and side monitor, side monitor, or wide view front monitor signals to the navigation receiver assembly*1 or radio and display receiver assembly*2 based on parameters such as the display settings, the front and side monitor main switch signal, the shift signal and the vehicle speed signal.

·

Depending on the display settings, renders the output display for the wide view front and side monitor, the side monitor, or the wide view front monitor, and outputs them to the screen of the navigation receiver assembly*1 or radio and display receiver assembly*2.

·

Renders each configuration page in the diagnosis window and outputs the screen to the navigation receiver assembly*1 or radio and display receiver assembly*2.


Navigation Receiver Assembly*1
Radio and Display Receiver Assembly*2
·

Communicates with the parking assist ECU through AVC-LAN communication.

·

This touch panel display is used to view and interact with the wide view front and side monitor, side view monitor, wide view front monitor, and diagnosis screens.


Spiral Cable Sub-assembly Detects the angle of the steering wheel and sends the resulting signals to the parking assist ECU through CAN communication.
Skid Control ECU (Brake Actuator Assembly) Sends the inner brake information and ABS ACT information to the parking assist ECU through CAN communication.
Four Wheel Drive Control ECU Sends the L4 condition signal to the parking assist ECU through CAN communication.
ECM Sends the vehicle condition, 2WD/4WD information and shift position information to the parking assist ECU through CAN communication.



OPERATION EXPLANATION


a.

The front and side monitor main switch ON signal is sent from the main switch to the parking assist ECU.

After receiving the front and side monitor main switch ON signal, the parking assist ECU switches the display signal to the wide view front monitor system.



DISPLAY CONDITIONS FOR FRONT MONITOR DISPLAY


HINT:

Illustrations may differ from the actual vehicle screen depending on the device settings and options. Therefore, some detailed areas may not be shown exactly the same as on the actual vehicle screen.


a.
E247370E04
0.469,1.063 0.771,0.646 0.771,0.646 0.969,0.646 false 0.521,2.625 0.792,2.917 0.792,2.917 0.99,2.917 false 0.063,0 0.26,0.177 0.198,0.177 10 false *1 1,0.563 1.198,0.74 0.198,0.177 10 false *2 1.021,2.833 1.219,3.01 0.198,0.177 10 false *3

Screen display operation

Text in Illustration
*1 Wide View Front and Side Monitor Screen
*2 Course guideline display change switch
*3 Automatic display mode set/cancel switch
(Illustration shows automatic display mode off)

i.

After the display conditions are met when the wide view front and side monitor systems are normally functioning, if the screen is changed from the manual display mode or automatic display mode screen, the wide view front and side monitor screen (H4 mode) or wide view front monitor screen (L4 mode) is displayed as the initial screen.

HINT:
·

If the shift lever is not in R and the wide view front and side monitor screen is displayed, the course guideline display change switch and automatic display mode set/cancel switch are displayed and the following operations can be performed.

·

For the course guideline display change switch, refer to the following procedures (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>WIDE VIEW FRONT MONITOR SYSTEM>DTC CHECK / CLEAR).

·

Automatic display mode set/cancel switch

Automatic mode display switch
(Indicator in the button)
Display mode
ON
(Illuminated)
Automatic display mode
OFF
(Not illuminated)
Manual display mode

·

The last mode screen is the screen that was displayed last when the screen was changed to the multi-display (display panel), information setting screen, etc.





b.

Display conditions for manual display mode

E252021E08
0.646,8.198 4.635,8.396 3.99,0.198 10 false : Wide view front and side monitor switch is pressed 0.073,0.031 0.917,0.292 0.844,0.26 12 false H4 Mode: 0.635,0.792 2.104,0.979 1.469,0.188 10 false Shift Position in D, N: 1.177,3.323 2.51,3.51 1.333,0.188 10 false Shift position in D, N 4.313,0.802 6.292,1.146 1.979,0.344 10 false Wide view front and side monitor screen (default screen) 2.99,3.021 4.313,3.417 1.323,0.396 10 false Current place or shift position in P 5.135,3.625 5.896,4.156 0.76,0.531 10 false Except shift position in R, P 6.323,3.625 7.146,4.021 0.823,0.396 10 false Shift position in R 2.969,4.448 4.26,4.958 1.292,0.51 10 false Current place or shift position in P 1.396,4.604 2.521,4.802 1.125,0.198 10 false Shift position in R 0.052,3.708 2.156,4.063 2.104,0.354 10 false Multi-display screen or information setting screen 0.76,2.104 2.333,2.271 1.573,0.167 10 false Rear side monitor screen 5.073,2.094 6.719,2.292 1.646,0.198 10 false Front side monitor screen 0.76,6.958 2.333,7.125 1.573,0.167 10 false Rear side monitor screen 5.073,6.958 6.719,7.156 1.646,0.198 10 false Front side monitor screen 0.635,5.323 2.104,5.51 1.469,0.188 10 false Shift Position in R: 0.854,5.635 2.323,6.01 1.469,0.375 10 false Parking assist monitor screen (default screen)

U149430E08
0.635,8.188 4.625,8.385 3.99,0.198 10 false : Wide view front and side monitor switch is pressed 0.042,0 0.885,0.26 0.844,0.26 12 false L4 Mode: 0.635,0.781 2.104,0.969 1.469,0.188 10 false Shift Position in D, N: 4.302,0.792 6.188,1.177 1.885,0.385 10 false Wide view front monitor screen (default screen) 2.99,3.01 4.292,3.417 1.302,0.406 10 false Current place or shift position in P 5.135,3.531 5.969,4.229 0.833,0.698 10 false Except shift position in R, P (Displayed Last Mode Screen) 6.323,3.625 7.146,4.021 0.823,0.396 10 false Shift position in R 2.958,4.469 4.25,4.938 1.292,0.469 10 false Current place or shift position in P 1.396,4.604 2.521,4.802 1.125,0.198 10 false Shift position in R 0.052,3.74 2.156,4.146 2.104,0.406 10 false Multi-display screen or information setting screen 0.76,2.073 2.333,2.24 1.573,0.167 10 false Rear side monitor screen 5.073,2.073 6.719,2.271 1.646,0.198 10 false Front side monitor screen 0.76,6.938 2.333,7.104 1.573,0.167 10 false Rear side monitor screen 5.073,6.938 6.719,7.135 1.646,0.198 10 false Front side monitor screen 0.635,5.333 2.104,5.521 1.469,0.188 10 false Shift Position in R: 0.854,5.646 2.323,6.021 1.469,0.375 10 false Parking assist monitor screen (default screen)

i.

H4 mode:

During manual display mode (shift lever in a position other than R), during engine switch on (IG) or engine startup (no DTCs are output), if the following conditions have been met, pressing the wide view front and side monitor switch will change the display mode as follows

Automatic Mode Display Switch Multi-display Screen Shift Lever Vehicle Speed Screen
(changes due to wide view front and side monitor switch operation)
OFF Multi-display screen or information setting screen Other than R 12 km/h (7.5 mph) or less Multi-display screen or information setting screen → Wide view front and side monitor screen → Front side monitor screen → Rear side monitor screen → Wide view front and side monitor screen
R position 0 km/h (0 mph) Multi-display screen or information setting screen → Parking assist monitor screen → Wide view front and side monitor screen → Front side monitor screen → Rear side monitor screen → Parking assist monitor screen


ii.

L4 mode:

During manual display mode (shift lever in a position other than R), during engine switch on (IG) or engine startup (no DTCs are output), if the following conditions have been met, pressing the wide view front and side monitor switch will change the display mode as follows

Automatic Mode Display Switch Multi-display Screen Shift Lever Vehicle Speed Screen
(changes due to wide view front and side monitor switch operation)
OFF Multi-display screen or information setting screen Other than R 12 km/h (7.5 mph) or less Multi-display screen or information setting screen → Wide view front monitor screen → Front side monitor screen → Rear side monitor screen → Wide view front monitor screen
R position 0 km/h (0 mph) Multi-display screen or information setting screen → Parking assist monitor screen → Wide view front and side monitor screen → Front side monitor screen → Rear side monitor screen → Parking assist monitor screen



c.

Screen display timer function

i.

During manual display mode (when the shift lever is not in R), when the wide view front and side monitor switch is pressed and the following conditions are met, the wide view front and side monitor screen is displayed for a certain period of time even when the vehicle speed is more than 12 km/h (7.5 mph).

E245953E09
5.125,1.25 5.125,3.24 false 5.125,1.271 5.333,0.646 5.333,0.646 5.563,0.646 false 2.823,3.75 2.854,3.604 2.854,3.604 3,3.604 false 5.156,3.74 5.188,3.594 5.188,3.594 5.333,3.594 false 0.094,0.073 0.875,0.292 0.781,0.219 12 false H4 Mode: 0.677,0.917 1.625,1.083 0.948,0.167 10 false Vehicle Speed 0.5,1.25 1.646,1.438 1.146,0.188 10 false 12 km/h (7.5 mph) 1.417,2.49 1.635,2.646 0.219,0.156 10 false On 1.979,3.51 2.625,3.667 0.646,0.156 10 false 8 seconds 2.031,3.958 2.292,4.146 0.26,0.188 10 false A 2.99,3.958 3.25,4.146 0.26,0.188 10 false B 4.135,3.958 4.438,4.156 0.302,0.198 10 false C 5.135,3.958 5.458,4.156 0.323,0.198 10 false D 3.823,3.521 4.604,3.708 0.781,0.188 10 false 4.5 minutes 5.635,0.563 6.646,0.76 1.01,0.198 10 false Canceled Timer 1.406,2.688 1.677,2.865 0.271,0.177 10 false Off 1.406,3.167 1.625,3.344 0.219,0.177 10 false On 1.406,3.365 1.635,3.542 0.229,0.177 10 false Off 1.406,3.865 1.615,4.042 0.208,0.177 10 false On 1.406,4.042 1.646,4.219 0.24,0.177 10 false Off 0.26,2.573 1.323,2.729 1.063,0.156 10 false 8 seconds Timer 0.25,3.281 1.354,3.469 1.104,0.188 10 false 4.5 minutes Timer 0.5,4.76 3.792,4.917 3.292,0.156 10 false : Wide view front and side monitor switch is pressed 0.5,5.208 2.302,5.396 1.802,0.188 10 false : Monitor screen display time 0.417,3.927 1.417,4.125 1,0.198 10 false Monitor display 3.021,3.5 3.667,3.656 0.646,0.156 10 true 8 seconds 5.375,3.51 6.021,3.667 0.646,0.156 10 true 8 seconds

Screen Display Time Time when Wide View Front and Side Monitor Switch is Pressed Change in Vehicle Speed Timer Operation Time Note
A
B
12 km/h (7.5 mph) or less 12 km/h (7.5 mph) or less 8 seconds When the wide view front and side monitor switch is pressed with the vehicle speed at 12 km/h (7.5 mph) or less, the camera screen is displayed for 8 seconds from the moment the switch is pressed. After this, if the vehicle speed increases to above 12 km/h (7.5 mph), the camera screen is not displayed.
C More than 12 km/h (7.5 mph) More than 12 km/h (7.5 mph) 8 seconds or 4 minutes and 30 seconds When the wide view front and side monitor switch is pressed while the vehicle speed is more than 12 km/h (7.5 mph), the camera screen is displayed for 4 minutes and 30 seconds the moment the switch is pressed (when the vehicle speed is more than 12 km/h (7.5 mph) after 4 minutes and 30 seconds elapse from the time the switch is pressed).
D More than 12 km/h (7.5 mph) More than 12 km/h (7.5 mph) → 12 km/h (7.5 mph) or less → More than 12 km/h (7.5 mph) 8 seconds or 4 minutes and 30 seconds When the wide view front and side monitor switch is pressed while the vehicle speed is more than 12 km/h (7.5 mph), the screen display timer operates and the camera screen is displayed. However, after the vehicle speed decreases to 12 km/h (7.5 mph) or less within 4 minutes and 30 seconds (after 8 seconds have elapsed), if the vehicle speed increases to more than 12 km/h (7.5 mph) again, the screen switches to the multi-display or information setting screen.
After the vehicle speed decreases to 12 km/h (7.5 mph) or less within 8 seconds, if the vehicle speed increases to more than 12 km/h (7.5 mph) again, the 4 minute 30 seconds timer is canceled and the camera screen is displayed for 8 seconds the moment the wide view front and side monitor switch is pressed.

E245952E10
2.813,2.417 2.896,2.24 2.896,2.24 3.031,2.24 false 5.177,2.406 5.26,2.229 5.26,2.229 5.396,2.229 false 2.24,3.74 2.323,3.563 2.323,3.563 2.458,3.563 false 3.5,3.75 3.583,3.573 3.583,3.573 3.719,3.573 false 5.385,3.75 5.469,3.573 5.469,3.573 5.604,3.573 false 0.229,0.125 1.052,0.344 0.823,0.219 12 false L4 Mode: 0.729,0.875 1.688,1.063 0.958,0.188 10 false Vehicle Speed 0.438,1.25 1.625,1.417 1.188,0.167 10 false 12 km/h (7.5 mph) 1.427,2.49 1.677,2.646 0.25,0.156 10 false On 1.667,2.146 2.344,2.302 0.677,0.156 10 true 8 seconds 2.208,3.948 2.344,4.104 0.135,0.156 10 false E 3.479,3.948 3.594,4.104 0.115,0.156 10 false F 5.396,3.948 5.51,4.104 0.115,0.156 10 false G 2.792,2.635 2.906,2.792 0.115,0.156 10 false B 1.99,2.635 2.104,2.792 0.115,0.156 10 false A 4.354,2.635 4.469,2.792 0.115,0.156 10 false C 5.104,2.615 5.219,2.771 0.115,0.156 10 false D 4.083,2.156 4.865,2.333 0.781,0.177 10 true 4.5 minutes 1.427,2.688 1.635,2.865 0.208,0.177 10 false Off 1.427,3.167 1.688,3.323 0.26,0.156 10 false On 1.427,3.365 1.635,3.542 0.208,0.177 10 false Off 1.396,3.854 1.646,4.01 0.25,0.156 10 false On 1.396,4.042 1.615,4.208 0.219,0.167 10 false Off 0.042,2.583 1.229,2.781 1.188,0.198 10 false H4 Monitor Display 0.031,3.26 1.396,3.458 1.365,0.198 10 false MTM 8 seconds Timer 0.5,4.76 3.677,4.927 3.177,0.167 10 false : Wide view front and side monitor switch is pressed 0.5,5.208 2.469,5.417 1.969,0.208 10 false : Monitor screen display time 0.031,3.927 1.281,4.115 1.25,0.188 10 false L4 Monitor Display 3.063,2.156 3.74,2.313 0.677,0.156 10 true 8 seconds 5.438,2.156 6.115,2.313 0.677,0.156 10 true 8 seconds 2.49,3.49 3.167,3.646 0.677,0.156 10 true 8 seconds 3.75,3.5 4.427,3.656 0.677,0.156 10 true 8 seconds 5.656,3.5 6.333,3.656 0.677,0.156 10 true 8 seconds

Screen Display Time Time when Wide View Front and Side Monitor Switch is Pressed Change in Vehicle Speed Timer Operation Time Note
A
B
12 km/h (7.5 mph) or less 12 km/h (7.5 mph) or less 8 seconds When the wide view front and side monitor switch is pressed with the vehicle speed at 12 km/h (7.5 mph) or less, the camera screen is displayed for 8 seconds from the moment the switch is pressed. After this, if the vehicle speed increases to above 12 km/h (7.5 mph), the camera screen is not displayed.
C More than 12 km/h (7.5 mph) More than 12 km/h (7.5 mph) 8 seconds or 4 minutes and 30 seconds When the wide view front and side monitor switch is pressed while the vehicle speed is more than 12 km/h (7.5 mph), the camera screen is displayed for 4 minutes and 30 seconds the moment the switch is pressed (when the vehicle speed is more than 12 km/h (7.5 mph) after 4 minutes and 30 seconds elapse from the time the switch is pressed).
D More than 12 km/h (7.5 mph) More than 12 km/h (7.5 mph) → 12 km/h (7.5 mph) or less → More than 12 km/h (7.5 mph) 8 seconds or 4 minutes and 30 seconds When the wide view front and side monitor switch is pressed while the vehicle speed is more than 12 km/h (7.5 mph), the screen display timer operates and the camera screen is displayed. However, after the vehicle speed decreases to 12 km/h (7.5 mph) or less within 4 minutes and 30 seconds (after 8 seconds have elapsed), if the vehicle speed increases to more than 12 km/h (7.5 mph) again, the screen switches to the navigation or information setting screen.
After the vehicle speed decreases to 12 km/h (7.5 mph) or less within 8 seconds, if the vehicle speed increases to more than 12 km/h (7.5 mph) again, the 4 minute 30 second timer is canceled and the camera screen is displayed for 8 seconds the moment the wide view front and side monitor switch is pressed.
E
F
G
More than 12 km/h (7.5 mph) More than 12 km/h (7.5 mph) 8 seconds If the vehicle speed is more than 12 km/h (7.5 mph), the camera screen is displayed for 8 seconds. After that, the camera screen is not displayed. The timer is canceled the moment the vehicle speed decreases to below 12 km/h (7.5 mph) during the 8 second timer.



d.

Display conditions for automatic display mode

i.

In automatic display mode, the screen display is automatically displayed according to driving conditions when the following conditions are met and the wide view front and side monitor systems are normally operating.

E348794E01
0.146,0.146 1.802,0.365 1.656,0.219 12 false Shift Position in D, N: 0.396,0.479 2.292,0.885 1.896,0.406 10 false Wide view front and side monitor screen (default screen) 0.188,1.521 1.115,1.927 0.927,0.406 10 false Rear side monitor screen 4.708,0.479 6.625,0.719 1.917,0.24 10 false Wide view front monitor screen 5.063,1.615 6.698,1.844 1.635,0.229 10 false Front side monitor screen 4.323,2.729 4.531,2.927 0.208,0.198 10 false *1 4.667,2.74 4.875,2.938 0.208,0.198 10 false *2 5.021,2.74 5.229,2.938 0.208,0.198 10 false *3 0.979,2.417 2.427,2.781 1.448,0.365 10 false Shift position in D or N, press the current place 0.385,3.292 2.01,3.677 1.625,0.385 10 false Multi-display screen or information setting screen 0.667,4.615 3.948,4.844 3.281,0.229 10 false : Wide view front and side monitor switch is pressed 0.167,4.979 6.635,5.385 6.469,0.406 10 false *1: When the vehicle speed changes to 10 km/h (6.2 mph) or more (for L4 mode, after the vehicle speed reaches 12 km/h (7.5 mph), the camera screen is displayed for 8 seconds and then the screen changes). 0.167,5.656 6.885,6.26 6.719,0.604 10 false *2: When the vehicle speed changes from below 12 km/h (7.5 mph) to 12 km/h (7.5 mph) or more (for L4 mode, after the vehicle speed reaches 12 km/h (7.5 mph) the camera screen is displayed for 8 seconds and then the screen changes). 0.167,6.427 5.156,6.667 4.99,0.24 10 false *3: When the shift position is changed from P or R to a position other than P or R.

Vehicle Condition Multi-display Screen Shift Lever Vehicle Speed Display Screen
Stopped → Driving Multi-display screen or information setting screen Not in P or R 12 km/h (7.5 mph) or less Multi-display screen or information setting screen → Wide view front monitor and side monitor screen*
Driving → Stopped Not in P or R 10 km/h (6.2 mph) or less Multi-display screen or information setting screen → Wide view front monitor and side monitor screen*

*: The conditions to change the screen after the display screen changes automatically are the same as in manual display mode.





COMMUNICATION SYSTEM OUTLINE


a.

The components of the wide view front monitor system communicate with each other through the AVC-LAN. If a short circuit or open circuit occurs in the AVC-LAN, communication is interrupted and the front monitor system will stop functioning.



DIAGNOSTIC FUNCTION OUTLINE


a.

This wide view front monitor system has a diagnostic function displayed in the navigation receiver assembly*1 or radio and display receiver assembly*2. This function enables the calibration (adjustment and confirmation) of the system (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>PARKING ASSIST MONITOR SYSTEM(w/ Side Monitor System)>CALIBRATION).


b.

The system can check the following items by using the GTS.

Item Proceed to
DTC (Click here)