Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › PARKING ASSIST MONITOR SYSTEM(w/ Side Monitor System) › 2015.06–2017.08
RM27T0E _56 Audio / Visual / Telematics _053722 PARK ASSIST / MONITORING _0261015 PARKING ASSIST MONITOR SYSTEM(w/ Side Monitor System) U

PARK ASSIST / MONITORING  PARKING ASSIST MONITOR SYSTEM(w/ Side Monitor System)  TERMINALS OF ECU  


PARKING ASSIST ECU


U149418E03
4.844,0.313 5.115,0.49 0.271,0.177 10 false I6 3.271,0.313 3.542,0.49 0.271,0.177 10 false I7

a.

Disconnect the I6 and I7 parking assist ECU connectors.


b.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
I6-1 (+B) - I6-4 (GND1) L - W-B Power source signal Always 10 to 16 V
I6-4 (GND1) - Body ground W-B - Body ground Ground Always Below 1 Ω
I6-8 (IG) - I6-4 (GND1) L - W-B IG power source signal Engine switch on (IG) 10 to 16 V
Engine switch off Below 1 V
I6-9 (ACC) - I6-4 (GND1) P - W-B ACC power source signal Engine switch on (ACC) 10 to 16 V
Engine switch off Below 1 V
I7-8 (BLSW) - I6-4 (GND1) L - W-B Front and side monitor main switch power source signal Engine switch on (IG), front and side monitor main switch on 10 to 16 V


c.

Reconnect the I6 and I7 parking assist ECU connectors.


d.

Measure the voltage, resistance and waveform according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
I6-10 (TX-) LG AVC-LAN communication signal - -
I6-11 (TX+) L AVC-LAN communication signal - -
I7-15 (CV+) - I7-37 (CGND) R - GR Rear television camera display signal input Engine switch on (IG), camera lens not covered, displaying image Pulse generation (See waveform 1)
Engine switch on (IG), camera lens covered, blacking out screen Pulse generation (See waveform 2)
I7-14 (CB+) - I7-37 (CGND) B - GR Power source to rear television camera Engine switch on (IG) 5.5 to 7.05 V
I7-27 (REV) - I6-4 (GND1) R - W-B Reverse signal Engine switch on (IG), shift lever in R 7.5 to 14 V
Engine switch on (IG), shift lever not in R Below 1 V
I7-37 (CGND) - I6-4 (GND1) GR - W-B Rear television camera ground (shield) Always Below 1 Ω
I7-38 (CV-) - I7-37 (CGND) W - GR Rear television camera ground Always Below 1 V


e.
E265840E17
1.271,1.479 1.531,2.063 false 1.125,1.594 0.896,2.063 false 1.313,3.542 1.635,4.229 false 1.167,3.604 0.875,4.229 false 0.063,0.052 0.26,0.24 0.198,0.188 10 false *a 0.063,2.188 0.26,2.375 0.198,0.188 10 false *b 0.323,1.042 0.667,1.208 0.344,0.167 10 false GND 0.406,3.198 0.75,3.365 0.344,0.167 10 false GND 0.771,2.052 0.969,2.24 0.198,0.188 10 false *c 1.49,2.063 1.688,2.25 0.198,0.188 10 false *d 1.635,4.25 1.833,4.438 0.198,0.188 10 false *d 0.729,4.198 0.927,4.385 0.198,0.188 10 false *c

Using an oscilloscope, check waveform.

Text in Illustration
*a Waveform 1
*b Waveform 2
*c Synchronized Signal
*d Video Waveform

HINT:

The video waveform changes according to the image sent by the rear television camera assembly.


i.

Waveform 1

Measurement Condition
Item Content
Terminal No. (Symbol) I7-15 (CV+) - I7-37 (CGND)
Tool Setting 200 mV/DIV., 50 μsec./DIV.
Condition Engine switch on (IG), camera lens is not covered, displaying an image.


ii.

Waveform 2

Measurement Condition
Item Content
Terminal No. (Symbol) I7-15 (CV+) - I7-37 (CGND)
Tool Setting 200 mV/DIV., 50 μsec./DIV.
Condition Engine switch on (IG), camera lens is covered, blacking out the screen.





RADIO AND DISPLAY RECEIVER ASSEMBLY (for Radio and Display Type) (See page Audio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM (for Radio and Display Type)>TERMINALS OF ECU)



MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) (See page Vehicle Interior>LIGHTING (INT)>LIGHTING SYSTEM>TERMINALS OF ECU)