Home › Power Source / Network › 1GD-FTV (BATTERY / CHARGING) › CHARGING SYSTEM › 2015.06–2020.08
RM27T0E _57 Power Source / Network _053727 1GD-FTV BATTERY / CHARGING _0261025 CHARGING SYSTEM D

1GD-FTV BATTERY / CHARGING  CHARGING SYSTEM  DTC CHECK / CLEAR  


CHECK DTC


a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.

HINT:

When freeze frame data is stored, check the freeze frame data (See page Power Source / Network>1GD-FTV (BATTERY / CHARGING)>CHARGING SYSTEM>FREEZE FRAME DATA).



e.

Check the DTC(s).



CLEAR DTC


NOTICE:
·

Do not clear DTCs until the cause of the malfunction is determined.

·

After inspecting and repairing the charging system and clearing DTCs, be sure to recheck for DTCs and make sure that no DTCs are output.



a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.

NOTICE:

DTCs and freeze frame data are cleared at the same time.



e.

Clear the DTC(s).