Home › Power Source / Network › NETWORKING › LIN COMMUNICATION SYSTEM
RM27T0E _57 Power Source / Network _053729 NETWORKING _0261030 LIN COMMUNICATION SYSTEM J

NETWORKING  LIN COMMUNICATION SYSTEM  Air Conditioning Control Panel does not Operate  


DESCRIPTION

When a switch of the integration control and panel assembly or air conditioning control assembly* is operated, the integration control and panel assembly or air conditioning control assembly* uses LIN communication to communicate with the air conditioning amplifier. If a switch of the integration control and panel assembly or air conditioning control assembly* does not operate properly, a problem with the LIN communication between the integration control and panel assembly or air conditioning control assembly* and air conditioning amplifier may be causing the malfunction.

*: w/ Rear Air Conditioning System


WIRING DIAGRAM

B416979E01
2.732,0.737 3.068,0.913 0.336,0.177 10 G25 2.732,2.278 3.068,2.455 0.336,0.177 10 G24 2.781,2.082 2.979,2.251 0.198,0.170 10 13 2.781,0.527 3.118,0.703 0.336,0.177 10 37 2.333,0.737 2.669,0.906 0.336,0.170 10 LIN1 2.291,2.278 2.676,2.448 0.385,0.170 10 RLIN 3.881,1.269 4.217,1.446 0.336,0.177 10 G23 4.357,0.625 4.694,0.801 0.336,0.177 10 3 1.128,2.915 3.423,3.085 2.295,0.170 10 Air Conditioning Amplifier Assembly 3.881,1.43 6.412,1.600 2.531,0.170 10 Integration Control and Panel Assembly 4.581,0.744 4.918,0.913 0.336,0.170 10 LIN1 4.602,2.285 4.987,2.455 0.385,0.170 10 RLIN 4.35,2.173 4.534,2.349 0.184,0.177 10 6 3.895,2.761 4.231,2.938 0.336,0.177 10 T7 3.895,2.922 6.099,3.092 2.205,0.170 10 Air Conditioning Control Assembly 3.65,2.215 3.799,2.385 0.149,0.170 10 * 0.112,3.371 2.324,3.540 2.211,0.170 10 *: w/ Rear Air Conditioning System 0.063,0.029 1.733,0.234 1.670,0.205 12 w/ Rear Seat Heater:

B416979E02
2.732,0.737 3.068,0.913 0.336,0.177 10 G25 2.732,2.278 3.068,2.455 0.336,0.177 10 G24 2.781,2.082 2.979,2.251 0.198,0.170 10 13 2.781,0.527 3.118,0.703 0.336,0.177 10 37 2.333,0.737 2.669,0.906 0.336,0.170 10 LIN1 2.291,2.278 2.676,2.448 0.385,0.170 10 RLIN 3.881,1.269 4.217,1.446 0.336,0.177 10 G23 4.357,0.625 4.694,0.801 0.336,0.177 10 3 1.128,2.915 3.423,3.085 2.295,0.170 10 Air Conditioning Amplifier Assembly 3.881,1.43 6.412,1.600 2.531,0.170 10 Integration Control and Panel Assembly 4.581,0.744 4.918,0.913 0.336,0.170 10 LIN1 4.602,2.285 4.987,2.455 0.385,0.170 10 RLIN 4.35,2.173 4.534,2.349 0.184,0.177 10 3 3.895,2.761 4.231,2.938 0.336,0.177 10 T3 3.895,2.922 6.099,3.092 2.205,0.170 10 Air Conditioning Control Assembly 3.65,2.215 3.799,2.385 0.149,0.170 10 * 0.112,3.371 2.324,3.540 2.211,0.170 10 *: w/ Rear Air Conditioning System 0.063,0.029 1.893,0.234 1.830,0.205 12 w/o Rear Seat Heater:

PROCEDURE

1.CHECK SWITCH OPERATION
a.

Check the switch operation.

Result
Result Proceed to
Integration control and panel assembly does not operate A
Air conditioning panel assembly does not operate B



A

2.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER - INTEGRATION CONTROL AND PANEL)

B

3.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER - AIR CONDITIONING CONTROL)
2.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER - INTEGRATION CONTROL AND PANEL)
a.

Disconnect the G25 air conditioning amplifier assembly connector.


b.

Disconnect the G23 integration control and panel assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
G25-37 (LIN1) - G23-3 (LIN1) Always Below 1 Ω
G25-37 (LIN1) or G23-3 (LIN1) - Body ground Always 10 kΩ or higher


Result
Result Proceed to
OK (for Automatic Air Conditioning System) A
OK (for Manual Air Conditioning System) B
NG C



A

B

C

REPAIR OR REPLACE HARNESS OR CONNECTOR

3.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER - AIR CONDITIONING CONTROL)
a.

Disconnect the G24 air conditioning amplifier assembly connector.


b.

Disconnect the T7*1 or T3*2 air conditioning control assembly connector.


*1: w/ Rear Seat Heater

*2: w/o Rear Seat Heater


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
w/ Rear Seat Heater
Tester Connection Condition Specified Condition
G24-13 (RLIN) - T7-6 (RLIN) Always Below 1 Ω
G24-13 (RLIN) or T7-6 (RLIN) - Body ground Always 10 kΩ or higher

w/o Rear Seat Heater
Tester Connection Condition Specified Condition
G24-13 (RLIN) - T3-3 (RLIN) Always Below 1 Ω
G24-13 (RLIN) or T3-3 (RLIN) - Body ground Always 10 kΩ or higher


Result
Result Proceed to
OK (for Automatic Air Conditioning System) A
OK (for Manual Air Conditioning System) B
NG C



A

B

C

REPAIR OR REPLACE HARNESS OR CONNECTOR