69110A
1.INSPECT BACK DOOR WITH MOTOR LOCK ASSEMBLY
Apply battery voltage to the door lock motor and check the operation of the door lock motor.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → 4 (ACT+)
Battery negative (-) → 1 (ACT-) |
Lock |
| Battery positive (+) → 1 (ACT-)
Battery negative (-) → 4 (ACT+) |
Unlock |
If the result is not as specified, replace the back door lock assembly.
Measure the resistance of the door lock position switch.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 7 (S) - 8 (E) | Lock | 10 kΩ or higher |
| 7 (S) - 8 (E) | Unlock | Below 1 Ω |
If the result is not as specified, replace the back door lock assembly.
| *a | Unlock |
| *b | Lock |