67939B
1.REMOVE CENTER BACK DOOR GARNISH
67938A
2.REMOVE BACK DOOR SIDE GARNISH LH
67937B
3.REMOVE BACK DOOR SIDE GARNISH RH
67761A
4.REMOVE BACK DOOR TRIM COVER
75202B
5.REMOVE UPPER TOOL BOX PANEL SUB-ASSEMBLY
09120A
6.REMOVE TOOL CASE
64798
7.REMOVE BACK DOOR LOCK COVER (w/o Back Door Tire Carrier, for Standard Type)
69783B
8.REMOVE BACK DOOR INSIDE HANDLE BEZEL (w/ Back Door Tire Carrier, for Face to Face Seat Type)
64780A
9.REMOVE BACK DOOR TRIM PANEL ASSEMBLY
69205F
10.REMOVE DOOR INSIDE HANDLE SUB-ASSEMBLY (w/ Back Door Tire Carrier, for Face to Face Seat Type)
67847A
11.REMOVE BACK DOOR SERVICE HOLE COVER
69350
12.REMOVE BACK DOOR LOCK ASSEMBLY
Disconnect the connector.
Using a T30 "TORX" wrench, remove the 3 screws.
| *A | for Standard Type |
| *B | w/ Back Door Tire Carrier, for Face to Face Seat Type |
Be careful when removing the bolts as the door lock may fall and become damaged.
Disconnect the cable and remover the back door lock assembly.
Remove the door lock wiring harness seal from the back door lock assembly.