Home › Vehicle Interior › DOOR LOCK › TRANSMITTER BATTERY(w/o Entry and Start System) › 2015.06–2017.08
RM27T0E _58 Vehicle Interior _053730 DOOR LOCK _0261044 TRANSMITTER BATTERY(w/o Entry and Start System) A

DOOR LOCK  TRANSMITTER BATTERY(w/o Entry and Start System)  REPLACEMENT  


CAUTION / NOTICE / HINT

NOTICE:

Take extra care when handling these precision electronic components.


PROCEDURE

Hide 89751A 1.REMOVE TRANSMITTER HOUSING COVER (except Separate Type)

a.
U122533E03
1.24,1.01 1.646,1.458 1.646,1.458 1.854,1.458 false 1.885,1.385 2.583,1.729 0.698,0.344 10 false *1

Twist a screwdriver in the direction of the arrow in the illustration, and remove the transmitter housing cover.

Text in Illustration
*1 Protective Tape

NOTICE:

Do not forcibly pry open the cover.


HINT:

Tape the screwdriver tip before use.



Hide 89071B 2.REMOVE DOOR CONTROL TRANSMITTER MODULE (except Separate Type)

NOTICE:

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.


a.
B137124E04
1.667,0.969 1.104,0.833 1.104,0.833 0.854,0.833 false 0.677,0.76 0.917,1.167 0.24,0.406 10 false *1

Using a precision screwdriver, remove the door control transmitter module.

Text in Illustration
*1 Protective Tape

HINT:

Tape the screwdriver tip before use.



Hide 89745A 3.REMOVE TRANSMITTER BATTERY (except Separate Type)

NOTICE:

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.


a.
B102246

Twist a coin in the direction of the arrow in the illustration and remove the transmitter battery cover.


b.
B102247

Remove the battery (lithium battery: CR2016).

NOTICE:
·

Do not push the terminals with your finger.

·

Do not forcibly pry up the battery. The terminals may become damaged.

·

Do not touch the battery with wet hands. Water may cause rust.

·

Do not touch or move any components inside the transmitter. It may cease to work.




Hide 89745A 4.INSTALL TRANSMITTER BATTERY (except Separate Type)

NOTICE:

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.


a.
B102768

Install a new battery (lithium battery: CR2016) with the positive (+) side facing upward as shown in the illustration.

NOTICE:
·

Be careful not to bend the transmitter battery electrode during insertion.

·

Keep the transmitter cover interior free of dust and oil.




b.

Install the cover.


Hide 89071B 5.INSTALL DOOR CONTROL TRANSMITTER MODULE (except Separate Type)

a.

Install the door control transmitter module.


Hide 89751A 6.INSTALL TRANSMITTER HOUSING COVER (except Separate Type)

a.

Install the transmitter housing cover to the transmitter housing case.


b.

Check that the transmitter LED illuminates 3 times when a switch is pressed 3 times.


Hide 89745A 7.REMOVE TRANSMITTER BATTERY (for Separate Type)

NOTICE:

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.


a.
B239791

Twist a coin in the direction of the arrow in the illustration and remove the transmitter housing cover.


b.
B239792

Remove the battery (lithium battery: CR2032).

NOTICE:
·

Do not push the terminals with your finger.

·

Do not forcibly pry up the battery. The terminals may be damaged.

·

Do not touch the battery with wet hands. Water may cause rust.

·

Do not touch or move any components inside the transmitter. It may interfere with proper operation.




Hide 89745A 8.INSTALL TRANSMITTER BATTERY (for Separate Type)

NOTICE:

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.


a.
B239792

Install a new battery (lithium battery: CR2032) with the positive (+) side facing upward as shown in the illustration.

NOTICE:
·

Do not bend the transmitter battery electrode during insertion.

·

Keep the transmitter cover interior free of dust and oil.




b.

Install the transmitter housing cover.


c.

Press one of the transmitter switches and check that the LED illuminates.