Home › Vehicle Interior › DOOR LOCK › DOOR CONTROL TRANSMITTER(w/ Entry and Start System) › 2015.06–2017.08
RM27T0E _58 Vehicle Interior _053730 DOOR LOCK _0261045 DOOR CONTROL TRANSMITTER(w/ Entry and Start System) A

DOOR LOCK  DOOR CONTROL TRANSMITTER(w/ Entry and Start System)  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

Take extra care when handling these precision electronic components.


PROCEDURE

Hide 89745A 1.REMOVE TRANSMITTER BATTERY (for Type A)

a.
B208996

Push the release hook knob and extract the emergency key.


b.
B208997E01
2.413,1.464 2.588,1.655 0.175,0.191 10 *1 1.745,1.334 2.111,1.571 2.111,1.571 2.371,1.571 false

Insert a precision screwdriver into the gap, and turn the screwdriver to detach the transmitter housing cover.

Text in Illustration
*1 Protective Tape

HINT:

Tape the screwdriver tip before use.



c.
B107853

Remove the transmitter battery (lithium battery: CR1632).

NOTICE:
·

Do not push the terminals with your finger.

·

Do not forcibly pry up the transmitter battery. The terminals may be damaged.

·

Do not touch the transmitter battery with wet hands. Water may cause rust.

·

Do not touch or move any components inside the transmitter. It may interfere with proper operation.

·

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.




Hide 89745A 2.REMOVE TRANSMITTER BATTERY (for Type B)

a.
B356205

Push the release hook knob and extract the emergency key.


b.
B356206E03
1.719,1.948 2.219,2.5 2.219,2.5 2.5,2.5 false 2.583,2.417 3.073,2.75 0.49,0.333 10 false *1

Insert a precision screwdriver into the gap, and turn the screwdriver to detach the transmitter housing cover.

Text in Illustration
*1 Protective Tape

HINT:

Tape the screwdriver tip before use.



c.
B356452E01
1.986,2.66 1.161,2.66 1.161,2.66 0.863,2.305 false 2.021,2.568 2.399,2.780 0.378,0.211 10 *1

Insert a precision screwdriver into the gap and gently remove the transmitter battery (lithium battery: CR2032).

Text in Illustration
*1 Protective Tape

HINT:

Tape the screwdriver tip before use.


NOTICE:
·

Do not push the terminals with your finger.

·

Do not forcibly pry up the transmitter battery. The terminals may be damaged.

·

Do not touch the transmitter battery with wet hands. Water may cause rust.

·

Do not touch or move any components inside the transmitter. It may interfere with proper operation.

·

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.