Home › Vehicle Interior › DOOR LOCK › UNLOCK WARNING SWITCH
RM27T0E _58 Vehicle Interior _053730 DOOR LOCK _0261047 UNLOCK WARNING SWITCH G

DOOR LOCK  UNLOCK WARNING SWITCH  INSPECTION  


PROCEDURE

Hide 84052 1.INSPECT UNLOCK WARNING SWITCH ASSEMBLY

E178151E13
1.625,3.083 2.417,3.083 false 0.542,3.083 1.333,3.083 false 0.25,3 0.656,3.188 0.406,0.188 10 false UN- 2.5,3 2.906,3.208 0.406,0.208 10 false UN+ 0.125,1.542 0.417,1.75 0.292,0.208 10 false *c 1.354,0.083 2.167,0.333 0.813,0.25 10 false *a 1.344,0.417 1.917,0.646 0.573,0.229 10 false *b

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 (UN+) - 2 (UN-) Not pushed 10 kΩ or higher
Pushed Below 1 Ω


If the result is not as specified, replace the unlock warning switch assembly.

Text in Illustration
*a Not Pushed
*b Pushed
*c Component without harness connected
(Unlock Warning Switch Assembly)