Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENTRY AND START SYSTEM (for Start Function) › 2015.06–2017.08
RM27T0E _58 Vehicle Interior _053731 THEFT DETERRENT / KEYLESS ENTRY _0261052 ENTRY AND START SYSTEM(for Start Function) D

THEFT DETERRENT / KEYLESS ENTRY  ENTRY AND START SYSTEM(for Start Function)  SYSTEM DESCRIPTION  


PUSH-BUTTON START DESCRIPTION


a.

The push-button start function uses a push-type engine switch, which the driver can operate by merely carrying the key. This system consists primarily of the power management control ECU, engine switch, ID code box, steering lock ECU, key, ACC relay, IG1 relay, IG2 relay and certification ECU. The power management control ECU controls the system. This function operates in cooperation with the entry and start system.



FUNCTION OF COMPONENT


Component Function
Engine switch
- Transponder key amplifier
Informs the driver of a power source mode or system abnormality with the illumination state of the indicator light.
Power management control ECU
·

Changes the power source mode in 4 stages (off, on (ACC), on (IG), start).

·

Controls the indicator light of the engine switch.

·

Activates the starter relay.


Certification ECU
·

Performs key verification (checks whether the correct key is present).

·

Controls the security indicator and the illumination of the lettering on the engine switch.

·

Records ECU verification codes.


Stop light switch*1 Outputs the state of the brake pedal to the power management control ECU.
Park/neutral position switch*1 Outputs the state of the shift lever to the power management control ECU.
Clutch start switch*2 Outputs the state of the clutch pedal to the power management control ECU.
Shift lock control ECU*1 Outputs a shift lock control ECU signal to the power management control ECU.
ID code box
·

Transmits a command to set or cancel the immobiliser to the ECM based on permission signals from the certification ECU.

·

Records ECU verification codes.


ECM
·

Receives an engine start request signal from the power management control ECU, turns on the starter relay, and starts the engine.

·

Receives a signal from the ID code box and performs engine ignition and injection.



*1: for Automatic Transmission

*2: for Manual Transmission



CONSTRUCTION AND OPERATION


A109251E05
1.989,0.145 2.227,0.351 0.238,0.206 10 *1 1.37,0.782 1.633,0.263 false 1.633,0.263 1.921,0.263 false

Text in Illustration
*1 Indicator Light

a.

Engine Switch

The engine switch consists of a momentary type switch, 2 colored LED (amber, green) and a transponder key amplifier.

·

The amber LED is for illumination.

·

The amber and green LEDs are for the indicator lights. The driver can check the present power source mode and whether the engine can start by checking the illumination state of the indicator light.

·

When the power management control ECU detects an abnormality in the entry and start system, it makes the amber indicator light flash. If the engine stopped in this state, it may not be possible to restart it.



b.

Indicator Light Condition

Engine Switch Indicator Light Condition
Power Source Mode/Condition Indicator Light Condition
Brake pedal released*1 Brake pedal depressed, shift lever in P or N*1 Clutch pedal released*2 Clutch pedal depressed*2
Off Off Turns on (Green) Off Turns on (Green)
On (ACC) or on (IG) Turns on (Amber) Turns on (Green) Turns on (Amber) Turns on (Green)
Engine running Off Off Off Off
Steering lock not unlocked Flashes (Green) for 30 sec. Flashes (Green) for 30 sec. Flashes (Green) for 30 sec. Flashes (Green) for 30 sec.
System malfunction Flashes (Amber) for 15 sec. Flashes (Amber) for 15 sec. Flashes (Amber) for 15 sec. Flashes (Amber) for 15 sec.

*1: for Automatic Transmission

*2: for Manual Transmission


c.

Power Management Control ECU

The power management control ECU consists of the IG1 and IG2 relay actuation circuits and CPU.

HINT:

Before removing the battery, make sure to turn the engine switch off. The power management control ECU constantly stores the present power source mode in its memory. Therefore, if the power management control ECU is interrupted by disconnecting the battery, the power management control ECU restores the power source mode after the battery is reconnected. For this reason, if the battery is disconnected when the engine switch is not off, the power is restored to the vehicle at the same time the power is restored to the power management control ECU (by reconnecting the battery).




PUSH-BUTTON START FUNCTION OPERATION


a.

This system has different power source mode patterns depending on the brake pedal*1 or clutch pedal*2 condition and shift lever position*1.

*1: for Automatic Transmission

*2: for Manual Transmission


Brake Pedal*1 Clutch Pedal*2 Shift Lever Position*1 Power Source Mode Pattern
Depressed Depressed P or N When the engine switch is pushed once.
·

off → engine start


Not depressed Not depressed P Each time the engine switch is pushed.
·

off → on (ACC) → on (IG) → off


Except P Each time the engine switch is pushed.
·

off → on (ACC) → on (IG) → on (ACC)


- - P When the engine switch is on (IG) (engine running).
·

on (IG) → off


- - Except P When the engine switch is on (IG) (engine running).
·

on (IG) → on (ACC)



When the battery of the key is low or the signal communication is affected by wave noise, the push-button start function can be operated by holding the key against the engine switch.

*1: for Automatic Transmission

*2: for Manual Transmission


i.

for Automatic Transmission:

·

After approximately 20 minutes have passed with the engine switch on (ACC) and the shift lever in P, the power management control ECU automatically cuts the power supply (the power source mode changes to off).

·

After approximately 1 hour has passed with the engine switch on (IG) and the shift lever in P, the power management control ECU automatically cuts the power supply (the power source mode changes to off).

·

The illustration below shows the transition of power source modes.

Transition of power source mode:


C256451E07
0.667,1.719 1.542,2.052 0.875,0.333 10 false Engine switch pushed 0.167,4.375 0.573,4.708 0.406,0.333 10 false on (ACC) 0.25,5.26 0.51,5.594 0.26,0.333 10 false on (IG) 0.146,6.115 0.594,6.448 0.448,0.333 10 false Engine Start 1.583,1.594 2.458,1.927 0.875,0.333 10 false Engine switch pushed 3.854,1.563 4.323,2.052 0.469,0.49 10 false Engine switch pushed 5.719,1.604 6.188,2.094 0.469,0.49 10 false Engine switch pushed 4.594,1.573 5.469,1.906 0.875,0.333 10 false Engine switch pushed 6.396,1.552 6.865,2.042 0.469,0.49 10 false Engine switch pushed 4.646,2.448 5.406,2.781 0.76,0.333 10 false Brake pedal depressed 6.365,2.448 7.031,2.938 0.667,0.49 10 false Brake pedal depressed 1.635,2.448 2.396,2.781 0.76,0.333 10 false Brake pedal depressed 3.146,1.604 3.719,2.25 0.573,0.646 10 false Not operated for 1 hour 2.5,1.531 3.073,2.188 0.573,0.656 10 false Not operated for 20 minutes 2.135,1.083 2.25,1.26 0.115,0.177 10 false P 4.073,5.427 4.219,5.604 0.146,0.177 10 false * 4.344,6.375 4.49,6.552 0.146,0.177 10 false * 0.281,3.729 0.458,3.906 0.177,0.177 10 false off 4.594,1.083 4.719,1.26 0.125,0.177 10 false N 3.438,0.646 4.271,0.823 0.833,0.177 10 false Shift Position 5.875,1.083 6.75,1.26 0.875,0.177 10 false Except P or N 0.604,7.146 1.375,7.333 0.771,0.188 10 false : Transition 0.615,7.698 3.125,7.885 2.51,0.188 10 false : Only when the key certification is OK. 3.917,7.125 6.25,7.313 2.333,0.188 10 false : Only when the vehicle is stopped. 3.938,7.698 6.563,8.271 2.625,0.573 10 false : After the on (ACC) mode is reached (where indicated by *), when the shift lever is moved to P this transition occurs. 5.292,6.385 5.438,6.563 0.146,0.177 10 false * 5.906,5.438 6.052,5.615 0.146,0.177 10 false * 6.885,6.375 7.031,6.552 0.146,0.177 10 false * 6.125,6.385 6.271,6.563 0.146,0.177 10 false *

HINT:

While the vehicle is being driven normally, operation of the engine switch is disabled. However, if the engine must be stopped in an emergency while the vehicle is being driven, pressing and holding the engine switch for 2 seconds or more or by quickly pressing the engine switch 3 times or more stops the engine and then the power source mode changes from start to on (ACC).



ii.

for Manual Transmission:

·

After approximately 20 minutes have passed with the engine switch on (ACC), the power management control ECU automatically cuts the power supply (the power source mode changes to off).

·

After approximately 1 hour has passed with the engine switch on (IG), the power management control ECU automatically cuts the power supply (the power source mode changes to off).

·

The illustration below shows the transition of power source modes.

Transition of power source mode:


C256452E05
0.667,3.219 1.26,3.385 0.594,0.167 10 false on (ACC) 0.74,4.052 1.188,4.219 0.448,0.167 10 false on (IG) 0.573,4.885 1.354,5.052 0.781,0.167 10 false Engine Start 2.229,1.104 3.25,1.438 1.021,0.333 10 false Clutch pedal not depressed 0.885,2.375 1.063,2.552 0.177,0.177 10 false off 0.188,0.583 1.708,0.76 1.521,0.177 10 false Engine Switch Condition 2.063,0.521 3.438,0.698 1.375,0.177 10 false Engine switch pushed 3.875,0.479 5.25,0.656 1.375,0.177 10 false Engine switch pushed 3.833,1.104 5.313,1.281 1.479,0.177 10 false Clutch pedal depressed 6.417,0.542 6.99,1.188 0.573,0.646 10 false Not operated for 1 hour 5.604,0.448 6.177,1.104 0.573,0.656 10 false Not operated for 20 minutes 0.583,5.719 2.323,6.094 1.74,0.375 10 false : Transition of power source mode (always) 2.906,5.698 4.667,6.25 1.76,0.552 10 false : Transition of power source mode (only when key code is certified) 5.198,5.708 7.021,6.26 1.823,0.552 10 false : Transition of power source mode (only with vehicle stopped)

HINT:

While the vehicle is being driven normally, operation of the engine switch is disabled. However, if the engine must be stopped in an emergency while the vehicle is being driven, pressing and holding the engine switch for 2 seconds or more or by quickly pressing the engine switch 3 times or more stops the engine and then the power source mode changes from start to on (ACC).





SYSTEM NOT OPERATING NORMALLY (DUE TO KEY BATTERY DEPLETION, ELECTRICAL NOISE, ETC.)


a.
C217213

To operate the push-button start function when the key battery is low or the signal communication is affected by wave noise, hold the key against the engine switch with the brake pedal*1 or clutch pedal*2 depressed.

*1: for Automatic Transmission

*2: for Manual Transmission




DIAGNOSIS



The power management control ECU can detect malfunctions in the push-button start function when the power source mode is on (IG).

When the ECU detects a malfunction, the amber indicator light of the engine switch flashes to warn the driver. At the same time, the ECU stores a 5-digit DTC (Diagnostic Trouble Code) in memory.

·

The indicator light warning continues flashing for 15 seconds even after the power source mode is changed to off.

·

The DTCs can be output by connecting the intelligent tester to the DLC3.

·

The push-button start function cannot be operated if a malfunction occurs.