Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
53510
1.INSTALL HOOD LOCK ASSEMBLY (ENGINE HOOD COURTESY SWITCH)
Apply MP grease to the sliding areas of the hood lock assembly (engine hood courtesy switch).
Connect the hood lock control cable assembly.
Connect the connector.
Install the hood lock assembly (engine hood courtesy switch) with the 3 bolts.
53525
2.INSTALL HOOD LOCK RELEASE LEVER PROTECTOR
Attach the 2 clamps and 2 guides to install the hood lock release lever protector.
88211B
3.INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)
53111
4.INSTALL RADIATOR GRILLE
88211B
5.ADJUST MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)
53292A
6.INSTALL UPPER RADIATOR SUPPORT SEAL