84231E
1.INSPECT HOOD LOCK ASSEMBLY (ENGINE HOOD COURTESY SWITCH)
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 (+) - 4 (E) | Unlock position | Below 1 Ω |
| 1 (+) - 4 (E) | Lock position | 10 kΩ or higher |
| 2 (HWM+) - 3 (HWM-) | Always | Below 1 Ω |
If the result is not as specified, replace the hood lock assembly.
| *a | Component without harness connected
(Hood Lock Assembly (Engine Hood Courtesy Switch)) |
| *b | Lock Position |
| *c | Unlock Position |