Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
53292A
1.REMOVE UPPER RADIATOR SUPPORT SEAL
53111
2.REMOVE RADIATOR GRILLE
88211B
3.REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)
53525
4.REMOVE HOOD LOCK RELEASE LEVER PROTECTOR
Detach the 2 clamps, 2 guides and remove the hood lock release lever protector.
| *a | Clamp |
| *b | Guide |
53510
5.REMOVE HOOD LOCK ASSEMBLY (ENGINE HOOD COURTESY SWITCH)
Remove the 3 bolts.
Disconnect the connector.
Disconnect the hood lock control cable assembly and remove the hood lock assembly (engine hood courtesy switch).