84945
1.INSPECT BACK DOOR ELECTRICAL KEY SWITCH
Check the operation of the switch.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 2 (L) - 3 (B) | Lock switch not pushed | 10 kΩ or higher |
| Lock switch pushed | Below 1 Ω | |
| 5 (UL) - 6 (E) | Unlock switch not pushed | 10 kΩ or higher |
| Unlock switch pushed | Below 1 Ω |
If the result is not specified, replace the back door electrical key switch.
| *a | Component without harness connected
(Back Door Electrical Key Switch) |