Home › Vehicle Interior › LIGHTING (INT) › LIGHTING SYSTEM › 2015.06–2017.08
RM27T0E _58 Vehicle Interior _053732 LIGHTING (INT) _0261068 LIGHTING SYSTEM A

LIGHTING (INT)  LIGHTING SYSTEM  CUSTOMIZE PARAMETERS  


PROCEDURE

Hide 1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER

HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Record the current settings before customizing.



a.

Connect the intelligent tester to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the intelligent tester on.


d.

Enter the following menus: Customize Setting / Illuminated Entry.


e.

Select the setting by referring to the table below.

Illuminated Entry
Tester Display Default Content Setting
Lighting Time 15 s Changes the lighting time after closing all of the doors (the lights will fade out immediately when turning the ignition switch from off to ACC or ON). 7.5 s, 15 s or 30 s
I/L when ACC OFF ON This function turns on the lights when the ignition switch is turned from ON or ACC to off (the room light turns on when the interior light switch is set to DOOR). ON or OFF
I/L ON W/Door Key Unlock*2 ON This function turns on the room light when the door is unlocked with the door key cylinder (the room light turns on when the map light switch is set to DOOR). ON or OFF
Light Control ON This function controls the interior foot lights, inside handle illumination, ornament illumination and door pocket illumination. ON or OFF
Room Light when Aprchd*1 ON This function turns on the room light when the key is brought within the vehicle exterior detection area (the room light turns on when the map light switch is set to DOOR). ON or OFF
Inside Foot Light*3 ON This function controls the interior foot lights. ON or OFF
Center Console Spot Light ON Lights up the center console spot light when the ignition switch is turned to ACC or ON. ON or OFF
Mirror Foot Light Time*4 15 s Side step light illumination duration. 0 s, 7.5 s, 15 s or 30 s
Interior Light Control ON This function controls the interior lights. ON or OFF
Exterior Light Control*4 ON This function controls the side step lights. ON or OFF
Scuff Plate Lamp linked to Entry & Start*4 ON This function turns on the side step light when the key is brought within the vehicle exterior detection area. ON or OFF
Scuff Plate Lamp linked to Wireless Key*4 ON This function turns on the side step light when the door is unlocked with the wireless key. ON or OFF
Scuff Plate Lamp linked to D-Door Unlock SW*4 ON This function turns on the side step light when the door is unlocked with the manual unlock switch. ON or OFF
Scuff Plate Lamp linked to Door open*4 ON This function turns on the side step light when the driver door is opened. ON or OFF

*1: w/ Entry and Start System

*2: w/o Entry and Start System

*3: w/ Interior Foot Light

*4: w/ Side Step Light



f.

Customizing with the Multi-display

i.

Turn the ignition switch to ON.


ii.

Enter the following menus: MENU / Setup / Vehicle / Vehicle customization / Lights settings.


iii.

Select the setting by referring to the table below.

Vehicle settings
Tester Display Default Content Setting
Interior light off timer 15 s Changes the lighting time of the following lights that are operated by the timer function when the door switch of the map light assembly is on: Off, 7.5 s, 15 s or 30 s