81240D
1.REMOVE NO. 2 ROOM LIGHT ASSEMBLY
Using a screwdriver, detach the 4 claws and remove the lens.
Tape the screwdriver tip before use.
| *1 | Protective Tape |
Using a screwdriver, detach the 2 claws and 2 guides, and remove the 2 covers.
Tape the screwdriver tip before use.
| *1 | Protective Tape |
Using a screwdriver, detach the 4 claws and disconnect the light as shown in the illustration.
Tape the screwdriver tip before use.
| *1 | Protective Tape |
Using a screwdriver, detach the 4 claws and disconnect the room light switch base from the light.
81240D
2.REMOVE NO. 2 ROOM LIGHT ASSEMBLY (w/ Personal Light)
Using a screwdriver, detach the 4 claws and remove the lens.
Tape the screwdriver tip before use.
| *1 | Protective Tape |
Using a screwdriver, detach the 4 claws and disconnect the light as shown in the illustration.
Tape the screwdriver tip before use.
| *1 | Protective Tape |
Using a screwdriver, detach the 8 claws and disconnect the room light switch base from the light.