81080G
1.INSPECT REAR DOOR INSIDE HANDLE ILLUMINATION LIGHT ASSEMBLY LH
Apply battery voltage to the connector and check the LED illumination.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 2 (+B)
Battery negative (-) → Terminal 1 (GND) |
LED illuminates |
If the result is not as specified, replace the rear door inside handle illumination light assembly LH.
| *a | Component without harness connected
(Rear Door Inside Handle Illumination Light Assembly LH) |
81081A
2.INSPECT NO. 2 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY
Apply battery voltage to the connector and check the LED illumination.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 1 (+B)
Battery negative (-) → Terminal 2 (GND) |
LED illuminates |
If the result is not as specified, replace the No. 2 interior illumination light sub-assembly.
| *a | Component without harness connected
(No. 2 Interior Illumination Light Sub-assembly) |