Home › Vehicle Interior › MIRROR (INT) › INNER REAR VIEW MIRROR › 2015.06–2017.08
RM27T0E _58 Vehicle Interior _053734 MIRROR (INT) _0261085 INNER REAR VIEW MIRROR G

MIRROR (INT)  INNER REAR VIEW MIRROR  INSPECTION  


PROCEDURE

Hide 87810 1.INSPECT INNER REAR VIEW MIRROR ASSEMBLY (w/ EC Mirror)

a.

Check operation of the electrochromic mirror.

B395420E01
4.365,1.771 4.896,1.771 false 1.458,1.375 1.729,1.531 true 1.844,1.594 1.427,1.844 true 1.979,2.688 1.979,3.031 1.979,3.031 1.646,3.031 true 1.229,0.896 1.542,1.094 0.313,0.198 10 false *a 1.271,1.24 1.583,1.479 0.313,0.24 10 false IG 1.281,1.781 1.594,2.021 0.313,0.24 10 false E 4.167,1.677 4.479,1.917 0.313,0.24 10 false *1 4.229,2.323 4.542,2.521 0.313,0.198 10 false *b 4.26,3.146 4.573,3.344 0.313,0.198 10 false *c 1.5,2.948 1.813,3.188 0.313,0.24 10 false A

Text in Illustration
*1 Black-colored Tape
*a Component without harness connected
(Inner Rear View Mirror Assembly)
*b Bright
*c Dark

i.

Connect the positive (+) lead of the battery to terminal 7 and the negative (-) lead to terminal 6.


ii.

Check that the LED labeled A in the illustration is illuminated.


iii.

Attach black-colored tape to the forward sensor to prevent it from sensing light.


iv.

Shine an electric light on the mirror. Check that the mirror surface changes from bright to dark.

HINT:

When the environment is very bright, the antiglare operation may occur immediately after the tape is applied.


If the result is not as specified, replace the inner rear view mirror assembly.