Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
55401E
1.REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
Remove the instrument panel safety pad sub-assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>REMOVAL).
82142A
2.REMOVE NO. 2 INSTRUMENT PANEL WIRE
Disconnect the connector.
When handling the airbag connector, take care not to damage the airbag wire harness.
Detach the clamp and remove the wire.
73960A
3.REMOVE INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY
Remove the 2 screws.
Detach the 5 hooks (A).
| *a | Hook A |
| *b | Hook B |
Detach the 5 hooks (B) and remove the instrument panel passenger airbag.