Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › AIRBAG CUT-OFF SWITCH
RM27T0E _58 Vehicle Interior _053735 SUPPLEMENTAL RESTRAINT SYSTEMS _0261098 AIRBAG CUT-OFF SWITCH G

SUPPLEMENTAL RESTRAINT SYSTEMS  AIRBAG CUT-OFF SWITCH  INSPECTION  


PROCEDURE

Hide 69065A 1.INSPECT AIRBAG CUTOFF SWITCH CYLINDER SUB-ASSEMBLY

a.
C148932E06
0.213,0.502 2.744,0.857 2.531,0.355 10 *a 2.011,2.903 2.510,3.045 0.499,0.142 10 MSW- 0.877,2.907 1.370,3.049 0.493,0.142 10 MSW+ 1.896,2.558 2.1,2.887 false 1.603,2.559 1.384,2.907 false

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 (MSW-) - 2 (MSW+) Cutoff switch on
(Open)
400 Ω
Cutoff switch off
(Closed)
100 Ω


If the result is not as specified, replace the airbag cutoff switch cylinder.

Text in Illustration
*a Component without harness connected
(Airbag Cutoff Switch Cylinder Sub-assembly)