The DTCs above are output during seat belt control ECU self-diagnosis.
When DTC B2015 or B2016 is stored, DTCs B2026 and B2027 are not stored.
When DTC B2020 or B2021 is stored, DTCs B2031 and B2032 are not stored.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| B2015 | While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second. | Seat belt control ECU |
| B2016 | While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second. | Seat belt control ECU |
| B2020 | While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second. | Seat belt control ECU |
| B2021 | While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second. | Seat belt control ECU |
| B2025 | While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second. | Seat belt control ECU |
| B2026 | While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second. | Seat belt control ECU |
| B2027 | While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second. | Seat belt control ECU |
| B2030 | While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second. | Seat belt control ECU |
| B2031 | While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second. | Seat belt control ECU |
| B2032 | While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second. | Seat belt control ECU |
| B2035 | While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second. | Seat belt control ECU |
| B2040 | While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second. | Seat belt control ECU |
| B2041 | While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second. | Seat belt control ECU |
| B2043 | While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second. | Seat belt control ECU |
| B2047 | While the initial check is running and the ignition switch is ON, the seat belt control ECU detects an internal malfunction for 1 second. | Seat belt control ECU |
Clear the DTCs (See page Vehicle Interior>PRE-CRASH SAFETY>PRE-CRASH SAFETY SYSTEM>DTC CHECK / CLEAR).
Check for DTCs (See page Vehicle Interior>PRE-CRASH SAFETY>PRE-CRASH SAFETY SYSTEM>DTC CHECK / CLEAR).
DTCs B2015 to B2047 are not output.
OK
(See pageGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING)
NG