Home › Vehicle Interior › PRE-CRASH SAFETY › PRE-CRASH BRAKE CANCEL SWITCH › 2015.06–2017.08
RM27T0E _58 Vehicle Interior _053736 PRE-CRASH SAFETY _0261102 PRE-CRASH BRAKE CANCEL SWITCH G

PRE-CRASH SAFETY  PRE-CRASH BRAKE CANCEL SWITCH  INSPECTION  


PROCEDURE

Hide 84770A 1.INSPECT PRE-CRASH SYSTEM CANCEL SWITCH ASSEMBLY

a.
B348974E01
0.514,1.76 0.813,2.003 0.298,0.243 10 *a 0.629,2.53 1.052,2.772 0.423,0.243 10 ECU 2.439,2.53 2.863,2.772 0.423,0.243 10 GND 1.548,2.724 1.033,2.615 false 1.884,2.724 2.4,2.615 false

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1(GND) - 2(ECU) Pressed Below 1 Ω
Not pressed 10 kΩ or higher


If the result is not as specified, replace the pre-crash system cancel switch assembly.

Text in Illustration
*a Component without harness connected
(Pre-crash System Cancel Switch Assembly)