Home › Vehicle Interior › SEAT › REAR NO. 2 SEAT ASSEMBLY (for Manual Seat Type LH Side) › 2015.06–2021.06
RM27T0E _58 Vehicle Interior _053737 SEAT _0261104 REAR NO. 2 SEAT ASSEMBLY(for Manual Seat Type LH Side) A

SEAT  REAR NO. 2 SEAT ASSEMBLY(for Manual Seat Type LH Side)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 58410R 1.REMOVE DECK BOARD ASSEMBLY

a.

Operate the 2 rear seat lock release levers and fold down the 2 seatbacks.


b.
B237359E01
2.156,2.594 2.314,2.736 0.158,0.142 10 *1 1.808,1.95 1.808,2.669 1.808,2.669 2.133,2.669 false

Using a screwdriver, detach the 2 claws and open the cover.

Text in Illustration
*1 Protective Tape

HINT:
·

Tape the screwdriver tip before use.

·

Use the same procedure to open the cover on the other side.




c.
B239969

Remove the 2 bolts.


d.

Detach the 4 clips and remove the deck board.


Hide 58418A 2.REMOVE REAR NO. 4 FLOOR BOARD

a.
B236502E01
3.21,1.377 3.361,1.519 0.151,0.142 10 *1 2.999,1.455 3.19,1.455 false 3.104,1.455 2.875,1.731 false

Using a moulding remover, detach the clip and 3 claws.

Text in Illustration
*1 Guide


b.

Detach the 2 guides and remove the floor board.


Hide 58417 3.REMOVE REAR NO. 3 FLOOR BOARD (w/o Rear Air Conditioning System)

a.
B239971E01
0.079,1.029 0.239,1.171 0.161,0.142 10 *1 0.165,1.188 0.165,1.274 0.165,1.274 0.442,1.274 false 1.26,1.562 1.421,1.704 0.161,0.142 10 *1 0.764,1.651 1.242,1.651 false

Using a moulding remover, detach the clip and 4 claws.

Text in Illustration
*1 Guide


b.

Detach the 2 guides and remove the floor board.


Hide 58417 4.REMOVE REAR NO. 3 FLOOR BOARD (w/ Rear Air Conditioning System)

a.
B236503E01
0.318,1.469 0.467,1.612 0.149,0.143 10 *1 0.682,1.414 0.682,1.549 0.682,1.549 0.48,1.549 false 0.682,1.549 0.79,1.549 false

Using a moulding remover, detach the clip and 3 claws.

Text in Illustration
*1 Guide


b.

Detach the 2 guides and remove the floor board.


Hide 58574A 5.REMOVE REAR FLOOR MAT SUPPORT PLATE

a.

Remove the 3 bolts.

B239970E01
2.073,2.503 2.229,2.654 0.156,0.151 10 *1 1.909,2.09 1.909,2.575 1.909,2.575 2.045,2.575 false 5.263,2.47 5.418,2.622 0.156,0.151 10 *1 5.552,1.375 5.552,2.538 5.552,2.538 5.417,2.538 false

Text in Illustration
*1 Guide - -


b.

Detach the 4 claws and 2 guides.


c.

Detach the 5 clips and remove the support plate.


Hide 58439D 6.REMOVE DECK BOARD BRACKET REINFORCEMENT

a.
B240098E01
0.636,1.042 0.788,1.187 0.152,0.145 10 *1 0.526,1.551 0.526,1.13 0.526,1.13 0.625,1.13 false 2.281,0.741 2.434,0.887 0.152,0.145 10 *1 2.98,0.984 2.98,0.821 2.98,0.821 2.455,0.821 false

Remove the 2 bolts.

Text in Illustration
*1 Hook


b.

Detach the 2 hooks and remove the reinforcement.


Hide 58417D 7.REMOVE NO. 1 DECK BOARD BRACKET LH

a.
B237365

Remove the 2 bolts and bracket.


Hide 8.REMOVE REAR NO. 2 SEAT ASSEMBLY LH

a.

Operate the rear seat lock release lever and raise the seatback.


b.

Pull out the seat cushion.


c.
B237367

Remove the 2 bolts.


d.
B237357E03
2.719,0.802 2.438,0.802 false 0.458,1.385 0.74,1.385 false 2.688,1.01 2.406,1.01 true 0.708,1.635 0.302,1.635 true 0.292,1.302 0.469,1.479 0.177,0.177 10 true *1 2.219,0.917 2.375,1.063 0.156,0.146 10 false *2 2.271,0.729 2.438,0.885 0.167,0.156 10 true *1 0.115,1.542 0.271,1.688 0.156,0.146 10 false *2

Using a screwdriver, detach the 2 guides and 6 claws and open the 2 covers.

HINT:

Tape the screwdriver tip before use.


Text in Illustration
*1 Protective Tape
*2 Guide


e.
B237358

Remove the 2 bolts.


f.
B236507

Remove the rear No. 2 seat assembly from the vehicle.

NOTICE:

Be careful not to damage the vehicle body.


HINT:

If removing the seat on the RH side with the LH side installed, remove it with the rear seat leg cover LH raised as shown in the illustration.