Home › Vehicle Interior › SEAT › REAR NO. 2 SEAT ASSEMBLY (for Manual Seat Type LH Side) › 2015.06–2021.06
RM27T0E _58 Vehicle Interior _053737 SEAT _0261104 REAR NO. 2 SEAT ASSEMBLY(for Manual Seat Type LH Side) A

SEAT  REAR NO. 2 SEAT ASSEMBLY(for Manual Seat Type LH Side)  DISASSEMBLY  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 71970 1.REMOVE REAR SEAT HEADREST ASSEMBLY

a.

Remove the headrest.


Hide 73949 2.REMOVE CAP

a.
B240438

Remove the 2 caps.


Hide 71693 3.REMOVE REAR SEAT LOWER CUSHION HINGE COVER LH

a.
B237376

Remove the 2 screws.


b.

Detach the 3 claws and remove the cover.


Hide 71693 4.REMOVE REAR SEAT LOWER CUSHION HINGE COVER RH

a.
B238682E01
1.324,1.942 1.480,2.091 0.156,0.149 10 *1 1.756,1.695 1.756,2.026 1.756,2.026 1.512,2.026 false

Remove the 2 screws.

Text in Illustration
*1 Guide


b.

Detach the 2 claws and guide and remove the cover.


Hide 73590 5.REMOVE REAR NO. 2 SEAT INNER BELT ASSEMBLY LH

Hide 71827B 6.REMOVE REAR NO. 1 SEAT CUSHION MOULDING

a.
B236519E01
0.922,1.635 1.092,1.787 0.170,0.152 10 *1 1.015,1.825 1.015,1.916 1.015,1.916 0.683,1.916 false 1.015,1.916 1.434,1.916 false 2.326,1.658 2.495,1.810 0.170,0.152 10 *1 2.419,1.848 2.419,1.939 2.419,1.939 2.068,1.939 false 2.419,1.939 2.838,1.939 false

Using a clip remover, remove the 2 clips.


b.

Detach the 2 claws and 4 guides and remove the moulding.

Text in Illustration
*1 Guide


Hide 7.REMOVE SEAT CUSHION COVER WITH PAD

a.
B239926E01
1.531,1.764 1.687,1.910 0.156,0.147 10 *1 0.414,1.426 3.061,1.426 false 1.611,1.431 1.611,1.741 false

Open the 2 fasteners.

Text in Illustration
*1 Fastener


b.
B236671

Using a clip remover, remove the 2 clips and open the under part of the seat cushion cover.


c.
B239928E01
1.398,1.737 1.547,1.893 0.149,0.156 10 *1 1.392,1.83 0.995,1.83 0.995,1.83 0.995,1.408 false 1.631,1.83 2.889,1.83 2.889,1.83 2.889,1.227 false

Detach the 2 hooks and remove the seat cushion cover with pad.

Text in Illustration
*1 Hook


Hide 79032 8.REMOVE NO. 3 SEAT CUSHION COVER SUB-ASSEMBLY LH

a.
B236523E01
2.446,1.893 2.614,2.050 0.169,0.157 10 *1 2.124,1.074 2.124,1.98 2.124,1.98 2.422,1.98 false

Detach the fastener.

Text in Illustration
*1 Fastener


b.

Remove the hog rings and seat cushion cover.


Hide 71647F 9.REMOVE REAR SEAT CUSHION INNER EDGE PROTECTOR LH

a.
B236571E01
2.815,0.997 2.974,1.153 0.159,0.156 10 *1 1.129,0.528 1.129,1.666 false 2.324,0.528 2.324,1.666 false 1.129,1.087 2.795,1.087 false 1.726,1.666 1.726,1.092 false

Cut off the tack pins and remove the edge protector from the seat cushion pad.

Text in Illustration
*1 Tack Pin


Hide 71827B 10.REMOVE REAR NO. 2 SEAT CUSHION MOULDING

a.
B237377

Remove the 2 screws.


b.

Detach the 2 claws and remove the moulding.


Hide 79202 11.REMOVE NO. 2 SEAT CUSHION FRAME SUB-ASSEMBLY LH

a.

Operate the rear No. 2 seat lock control lever and retract the seat cushion frame.


b.
B237378

Using a T40 "TORX" socket wrench, remove the 4 "TORX" bolts and remove the seat cushion frame.


Hide 72906 12.REMOVE 3RD SEAT LINK SUB-ASSEMBLY LH

a.
B237381E01
1.537,1.65 1.537,2.178 false 1.319,1.88 1.531,1.88 false 1.353,1.47 1.683,1.47 false 1.379,1.473 1.379,1.877 false 1.136,1.799 1.302,1.954 0.166,0.155 1.136,1.799 1.287,1.941 0.151,0.142 10 *1

Remove the 3 clips.


b.

Detach the 2 claws and 4 guides and remove the 3rd seat link.

Text in Illustration
*1 Guide


Hide 72058B 13.REMOVE REAR NO. 2 SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH

a.
B237379E01
2.828,0.583 2.979,0.730 0.151,0.147 10 *1 1.97,1.419 2.631,1.419 false 2.656,1.341 2.807,1.487 0.151,0.147 10 *2 1.935,1.194 2.683,0.666 2.683,0.666 2.803,0.666 false

Detach the clamp.

Text in Illustration
*1 Cable End
*2 Clamp


b.

Twist the cable end in the direction indicated by the arrow and disconnect the cable.


c.
B237380E01
2.169,1.563 2.318,1.705 0.149,0.142 10 *1 1.898,0.961 1.898,1.643 1.898,1.643 2.165,1.643 false 2.093,1.147 2.093,1.646 false

Remove the screw.

Text in Illustration
*1 Guide


d.

Detach the 2 guides and remove the lever.


Hide 79384 14.REMOVE REAR SEAT LEG COVER LH

a.
B237382E01
1.433,1.981 1.592,2.130 0.159,0.149 10 *1 0.683,2.059 1.426,2.059 false 0.932,2.261 0.932,2.059 false 1.263,2.454 1.263,2.063 false

Remove the clip.

Text in Illustration
*1 Hook


b.

Detach the 3 hooks and 5 clips and remove the cover.


Hide 79384A 15.REMOVE REAR NO. 3 SEAT LEG COVER LH

a.
B239683

Detach the 2 claws and remove the cover.


Hide 71694E 16.REMOVE REAR SEAT CUSHION INNER HINGE COVER LH

a.
B237383E01
1.068,0.467 1.220,0.605 0.152,0.139 10 *1 1.564,0.692 1.319,0.55 1.319,0.55 1.237,0.55 false

Remove the screw and clip.


b.

Detach the guide and remove the cover.

Text in Illustration
*1 Guide


Hide 71694E 17.REMOVE REAR SEAT CUSHION INNER HINGE COVER RH

a.
B237384E01
1.896,0.734 2.045,0.876 0.149,0.142 10 *1 2.067,0.805 2.178,0.805 2.178,0.805 2.178,1.075 false

Remove the screw and clip.


b.

Detach the guide and remove the cover.

Text in Illustration
*1 Guide


Hide 72695C 18.REMOVE REAR SEAT LOCK CONTROL CABLE LH

a.
B240106E01
1.518,1.933 1.667,2.075 0.149,0.142 10 *1 1.345,2.016 1.5,2.016 false 2.15,3.002 2.299,3.144 0.149,0.142 10 *2 2.333,3.096 2.415,3.096 2.415,3.096 2.428,2.838 false

Detach the clamp.


b.

Twist the cable end in the direction indicated by the arrow and remove the cable.

Text in Illustration
*1 Clamp
*2 Cable End


Hide 72615H 19.REMOVE REAR NO. 1 SEATBACK LOCK STRIKER COVER

a.
B237521E01
2.028,0.253 2.180,0.398 0.152,0.145 10 *1 1.587,0.934 1.91,0.332 1.91,0.332 2.008,0.332 false 0.984,1.645 1.136,1.790 0.152,0.145 10 *2 1.566,1.505 1.345,1.727 1.345,1.727 1.166,1.727 false

Using a screwdriver, detach the claw and guide and remove the cover.

Text in Illustration
*1 Guide
*2 Protective Tape

HINT:

Tape the screwdriver tip before use.



Hide 72058B 20.REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH

a.
B237386E01
0.244,0.572 0.409,0.722 0.165,0.15 0.244,0.572 0.394,0.710 0.151,0.139 10 *1 0.417,0.664 0.481,0.664 0.481,0.664 0.481,0.832 false 1.815,1.034 1.88,1.034 1.88,1.034 1.88,1.429 false 1.64,0.956 1.790,1.094 0.151,0.139 10 *3 0.637,0.243 0.802,0.393 0.165,0.15 0.637,0.243 0.788,0.381 0.151,0.139 10 *2 0.818,0.33 0.955,0.33 0.955,0.33 0.907,0.508 false

Remove the 2 screws.


b.

Detach the guide and remove the lever.


c.

Detach the clamp.


d.

Twist the cable end in the direction indicated by the arrow and disconnect the cable.

Text in Illustration
*1 Clamp
*2 Cable End
*3 Guide


Hide 66310F 21.REMOVE ROPE HOOK ASSEMBLY

a.
B237387E01
1.738,0.352 1.894,0.494 0.156,0.142 10 *1 1.484,0.894 1.484,0.434 1.484,0.434 1.712,0.434 false

Using a screwdriver, detach the 2 claws and open the cover.

Text in Illustration
*1 Protective Tape

HINT:

Tape the screwdriver tip before use.



b.
B237388

Remove the bolt and rope hook.


Hide 72615G 22.REMOVE REAR NO. 2 SEATBACK LOCK STRIKER COVER

a.
B237395E01
1.153,0.697 1.305,0.839 0.151,0.142 10 *1 1.66,0.941 1.417,0.781 1.417,0.781 1.328,0.781 false 2.193,1.431 2.344,1.573 0.151,0.142 10 *2 1.872,1.382 2.084,1.514 2.084,1.514 2.182,1.514 false

Using a screwdriver, detach the claw and guide and remove the cover.

Text in Illustration
*1 Guide
*2 Protective Tape

HINT:

Tape the screwdriver tip before use.



Hide 72690A 23.REMOVE REAR SEAT LOCK RELEASE LEVER ASSEMBLY

a.
B237397E01
1.938,0.264 2.094,0.408 0.156,0.144 10 *1 1.806,0.662 1.806,0.349 1.806,0.349 1.924,0.349 false

Remove the 2 screws.


b.

Detach the hook and remove the lever.

Text in Illustration
*1 Hook


c.
B237396E01
0.771,1.89 0.920,2.032 0.149,0.142 10 *2 1.892,1.735 1.892,1.967 1.892,1.967 0.943,1.967 false 1.527,1.853 1.527,1.967 false 1.562,0.177 1.710,0.319 0.149,0.142 10 *1 1.383,0.786 1.806,0.786 false 1.637,0.786 1.637,0.342 false

Detach the 2 clamps.


d.

Twist the 2 cable ends in the direction indicated by the arrow and disconnect the 2 cables.

Text in Illustration
*1 Cable End
*2 Clamp


Hide 71702C 24.REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY LH

a.
B240430

Detach the 7 clips and remove the board.


Hide 71931C 25.REMOVE REAR NO. 2 SEAT HEADREST SUPPORT ASSEMBLY

a.
B237586

Detach the 4 claws and remove the 2 headrest supports.


Hide 26.REMOVE SEATBACK COVER WITH PAD

a.
U169709E01
3.134,1.788 3.287,1.930 0.152,0.142 10 *1 2.38,1.302 2.978,1.302 false 2.389,1.87 3.124,1.87 false 0.097,1.805 0.249,1.947 0.152,0.142 10 *1 0.932,1.887 0.288,1.887 false

Detach the hooks and remove the seatback cover with pad.

Text in Illustration
*1 Hook


Hide 79034 27.REMOVE REAR NO. 3 SEATBACK COVER SUB-ASSEMBLY LH

a.
B240431

Remove the hog rings and seatback cover.


Hide 71587C 28.REMOVE REAR NO. 2 SEATBACK EDGE PROTECTOR

a.
B236572E01
3.015,1.004 3.179,1.179 0.164,0.175 10 *1 1.028,0.713 1.028,1.545 false 2.422,0.713 2.422,1.545 false 1.028,1.1 2.975,1.1 false 1.725,0.797 1.725,1.1 false

Cut off the tack pins and remove the protector from the seatback pad.

Text in Illustration
*1 Tack Pin


Hide 79962 29.REMOVE NO. 2 SEATBACK COVER

a.
B240757

Detach the 2 claws and remove the cover.


Hide 71834C 30.REMOVE REAR NO. 3 SEAT INNER RECLINING COVER LH

a.
B240113

Detach the 4 claws and remove the cover.


Hide 71834C 31.REMOVE REAR NO. 3 SEAT OUTER RECLINING COVER LH

a.
B237399E01
1.587,0.95 1.736,1.090 0.149,0.140 10 *1 1.889,1.149 1.889,1.029 1.889,1.029 1.763,1.029 false

Remove the screw.


b.

Detach the guide and 2 claws and remove the cover.

Text in Illustration
*1 Guide


Hide 71844C 32.REMOVE REAR NO. 2 SEAT INNER RECLINING COVER LH

a.
B238702

Detach the 5 claws and remove the cover.


Hide 71844A 33.REMOVE REAR NO. 2 SEAT OUTER RECLINING COVER LH

a.
B237400E01
1.422,1.128 1.573,1.267 0.151,0.140 10 *1 1.313,1.39 1.313,1.212 1.313,1.212 1.419,1.212 false

Remove the screw.


b.

Detach the guide and 2 claws and remove the cover.

Text in Illustration
*1 Guide


Hide 78091 34.REMOVE FOLD SEAT LOCK CONTROL CABLE SUB-ASSEMBLY

a.
B237525E03
0.667,1.76 0.448,1.76 false 2.833,1.323 3.094,1.323 false 0.542,2.667 0.344,2.667 false 2.313,0.969 2.313,0.854 2.313,0.854 2.042,0.854 false 2.177,1.896 2.177,1.646 2.177,1.646 2.24,1.646 false 1.792,2.49 1.604,2.49 false 0.281,1.688 0.448,1.833 0.167,0.146 10 false *3 3.115,1.25 3.281,1.396 0.167,0.146 10 false *3 0.156,2.583 0.323,2.729 0.167,0.146 10 false *1 2.219,0.969 2.385,1.115 0.167,0.146 10 false *1 2.25,1.552 2.417,1.698 0.167,0.146 10 false *2 1.802,2.406 1.99,2.604 0.188,0.198 10 true *4

Remove the clamp labeled B and detach the 2 labeled clamps A.


b.

Cut off the 2 cable ties.


c.

Twist the cable end in the direction indicated by the arrow and remove the cable.

Text in Illustration
*1 Clamp A
*2 Clamp B
*3 Cable Tie
*4 Cable End


Hide 79226 35.REMOVE NO. 2 SEAT LOCK CABLE

a.
B237526E01
2.453,1.996 2.602,2.145 0.149,0.149 10 *1 2.853,2.082 2.634,2.082 false 2.161,2.453 2.310,2.601 0.149,0.149 10 *2 2.15,2.532 1.769,2.532 false

Detach the clamp.


b.

Twist the cable end in the direction indicated by the arrow and remove the cable.

Text in Illustration
*1 Clamp
*2 Cable End


Hide 79304A 36.REMOVE NO. 3 SEATBACK FRAME SUB-ASSEMBLY LH

a.
B240432

Using a T45 "TORX" socket wrench, remove the 4 "TORX" bolts and frame.


Hide 79040 37.REMOVE NO. 3 SEAT LEG ASSEMBLY LH

a.
B240439

Remove the 4 clips and seat cushion under carpet LH from the No. 3 seat leg.


Hide 79020B 38.REMOVE NO. 2 SEAT LEG ASSEMBLY (for RH Side)

a.
B240440

Remove the 4 clips and seat cushion under carpet RH from the No. 2 seat leg.