Use the same procedure for LHD and RHD vehicles.
The procedure listed below is for LHD vehicles.
84923
1.INSTALL REAR POWER SEAT SWITCH
Attach the 2 claws to install the switch to the switch bezel.
84656A
2.INSTALL SWITCH BEZEL
Connect the connector.
Attach the 2 claws to install the switch bezel.
84923
3.INSTALL REAR POWER SEAT SWITCH
Attach the 2 claws to install the switch to the fold seat switch.
84190A
4.INSTALL NO. 1 FOLD SEAT SWITCH ASSEMBLY
Connect the 2 connectors.
Attach the 2 claws to install the fold seat switch.
5.CHECK REAR NO. 2 SEAT
Check the power seat operation (See page Vehicle Interior>SEAT>REAR POWER SEAT CONTROL SYSTEM>OPERATION CHECK).