Home › Vehicle Interior › SEAT › REAR NO. 2 SEAT ASSEMBLY(for Face to Face Seat Type)
RM27T0E _58 Vehicle Interior _053737 SEAT _0261108 REAR NO. 2 SEAT ASSEMBLY(for Face to Face Seat Type) A

SEAT  REAR NO. 2 SEAT ASSEMBLY(for Face to Face Seat Type)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.INSTALL REAR NO. 2 SEAT ASSEMBLY LH

a.

Fold the seat cushion.


b.

Attach the rear side seat band and fix the seat cushion in place.


c.

Place the rear No. 2 seat assembly in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



d.

Temporarily install the nut.


e.

Detach the rear side seat band and lower the seat cushion.


f.

Temporarily install the 3 bolts.


g.

Tighten the 3 bolts.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


h.
B242671

Attach the 2 claws to close the cover.


i.
B242670

Attach the 2 claws to close the cover.


j.

Fold the seat cushion.


k.

Attach the rear side seat band and fix the seat cushion in place.


l.

Tighten the nut.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


m.

Detach the rear side seat band and lower the seat cushion.


Hide 62552A 2.INSTALL REAR SEAT SIDE COVER LH

a.
B242667

Attach the 4 claws to install the cover.