Home › Vehicle Interior › SEAT › POWER SEAT SWITCH(for Rear LH)
RM27T0E _58 Vehicle Interior _053737 SEAT _0261109 POWER SEAT SWITCH(for Rear LH) G

SEAT  POWER SEAT SWITCH(for Rear LH)  INSPECTION  


PROCEDURE

Hide 84190B 1.INSPECT NO. 2 FOLD SEAT SWITCH ASSEMBLY (for Rear LH)

a.
B239070E01
1.453,3.185 1.572,3.341 0.119,0.156 10 E 1.665,2.847 1.527,3.185 false 2.49,2.269 3.104,2.411 0.614,0.142 10 RTRN(R) 0.49,1.885 1.063,2.027 0.573,0.142 10 RTRN(L) 0.261,2.905 0.834,3.047 0.573,0.142 10 FOLD(L) 2.192,3.117 2.792,3.259 0.600,0.142 10 FOLD(R) 2.02,2.532 2.467,2.36 false 1.207,1.965 1.459,1.965 1.459,1.965 1.596,2.521 false 1.424,2.859 0.966,2.991 false 1.854,2.859 1.957,3.214 1.957,3.214 2.169,3.214 false 0.511,0.779 0.671,0.935 0.161,0.156 10 *1 0.511,1.249 0.671,1.405 0.161,0.156 10 *2 2.735,0.779 2.895,0.935 0.161,0.156 10 *3 2.735,1.249 2.895,1.405 0.161,0.156 10 *4 1.625,1.736 1.785,1.892 0.161,0.156 10 *a 2.301,1.341 2.696,1.341 false 0.725,1.341 1.172,1.341 false 2.267,0.876 2.696,0.876 false 0.725,0.876 1.121,0.876 false

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
3 (RTRN(L)) - 7 (E) RETURN LH switch pressed Below 1 Ω
8 (FOLD(L)) - 7 (E) FOLD LH switch pressed
1 (RTRN(R)) - 7 (E) RETURN RH switch pressed
6 (FOLD(R)) - 7 (E) FOLD RH switch pressed


If the result is not as specified, replace the No. 2 fold seat switch assembly.

Text in Illustration
*1 RETURN LH Switch
*2 FOLD LH Switch
*3 RETURN RH Switch
*4 FOLD RH Switch
*a Component without harness connected
(No. 2 Fold Seat Switch Assembly)


b.
B239072E01
2.427,2.893 2.629,3.058 0.202,0.165 10 +B 2.032,2.847 2.398,2.979 false 1.631,1.822 1.800,1.992 0.170,0.170 10 *a 1.344,3.145 1.458,3.310 0.114,0.165 10 E 1.671,2.853 1.671,3.225 1.671,3.225 1.499,3.225 false

Apply battery voltage to the switch connector and check that the fold seat switch illuminates.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 5 (+B)
Battery negative (-) → 7 (E)
Illumination illuminates


If the result is not as specified, replace the No. 2 fold seat switch assembly.

Text in Illustration
*a Component without harness connected
(No. 2 Fold Seat Switch Assembly)