Home › Vehicle Interior › SEAT › REAR POWER SEAT CONTROL SYSTEM
RM27T0E _58 Vehicle Interior _053737 SEAT _0261112 REAR POWER SEAT CONTROL SYSTEM U

SEAT  REAR POWER SEAT CONTROL SYSTEM  TERMINALS OF ECU  


CHECK FOLD SEAT CONTROL ECU LH


U115522E03
2.865,0.365 3.042,0.51 0.177,0.146 10 false d1 4.656,0.365 4.833,0.51 0.177,0.146 10 false d2

a.

Disconnect the d1 and d2 ECU connectors.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No.
(Symbol)
Wiring Color Terminal Description Condition Specified Condition
d2-2 (+B) - d2-9 (GND2) R - W-B Power source (Battery) Always 11 to 14 V
d2-9 (GND2) - Body ground W-B - Body ground Ground Always Below 1 Ω
d2-10 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
d1-1 (ECUB) - d2-10 (GND) GR - W-B Power source (Battery) Always 11 to 14 V
d1-3 (IG) - d2-9 (GND2) B - W-B Power source (IG) Ignition switch ON 11 to 14 V
Ignition switch off Below 1 V
d1-6 (P) - Body ground*1 W - Body ground Park/neutral position switch signal Ignition switch ON
Shift lever in P
11 to 14 V
Ignition switch ON
Shift lever not in P
Below 1 V

If the result is not as specified, there may be a malfunction on the wire harness side.


c.

Reconnect the d1 and d2 ECU connectors.


d.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No.
(Symbol)
Wiring Color Terminal Description Condition Specified Condition
d2-1 (RCL+) - Body ground B - Body ground Reclining motor operation signal Rear power seat switch LH forward 11 to 14 V
d2-5 (RCL-) - Body ground L - Body ground Reclining motor operation signal Rear power seat switch LH backward 11 to 14 V
d2-8 (FLD+) - Body ground W - Body ground Cushion motor operation signal No. 1 or No. 2 fold seat switch LH fold 11 to 14 V
d2-7 (FLD-) - Body ground B - Body ground Cushion motor operation signal No. 1 or No. 2 fold seat switch LH return 11 to 14 V
d1-10 (FLD2) - Body ground GR - Body ground No. 1 fold seat switch signal (Fold) No. 1 fold seat switch LH off 11 to 14 V
No. 1 fold seat switch LH fold Below 1 V
d1-12 (RCLF) - Body ground P - Body ground Reclining forward switch signal Always 11 to 14 V
Rear power seat switch LH forward Below 1 V
d1-13 (RCLR) - Body ground Y - Body ground Reclining backward switch signal Always 11 to 14 V
Rear power seat switch LH backward Below 1 V
d1-14 (RTN2) - Body ground SB - Body ground No. 1 fold seat switch signal (Return) No. 1 fold seat switch LH off 11 to 14 V
No. 1 fold seat switch LH return Below 1 V
d1-15 (RTRN) - Body ground L - Body ground No. 2 fold seat switch signal (Return) No. 2 fold seat switch LH off 11 to 14 V
No. 2 fold seat switch LH return Below 1 V
d1-16 (FOLD) - Body ground V - Body ground No. 2 fold seat switch signal (Fold) No. 2 fold seat switch LH off 11 to 14 V
No. 2 fold seat switch LH fold Below 1 V
d1-17 (SV1) - d1-25 (SG1) P - R Folding position sensor power supply Ignition switch off Below 1 V
Ignition switch ON 5.5 to 8 V
d1-18 (SFLD) - d1-25 (SG1) G - R Folding position sensor signal Motor operating Pulse generation
d1-19 (SRCL) - d1-24 (SG2) LG - W Reclining position sensor signal Motor operating Pulse generation
d1-24 (SG2) - Body ground W - Body ground Reclining position sensor ground Always Below 1 Ω
d1-25 (SG1) - Body ground R - Body ground Folding position sensor ground Always Below 1 Ω
d1-37 (SV2) - d1-24 (SG2) GR - W Reclining position sensor power supply Ignition switch off Below 1 V
Ignition switch ON 5.5 to 8 V
d1-40 (PKB1) - Body ground*2 R - Body ground Parking brake switch signal Parking brake switch off 11 to 14 V
Parking brake switch on Below 1 V

*1: for Automatic Transmission

*2: for Manual Transmission


If the result is not as specified, the ECU may have a malfunction.



CHECK FOLD SEAT CONTROL ECU RH


U115523E03
4.667,0.344 4.833,0.5 0.167,0.156 10 false c2 2.865,0.344 3.042,0.5 0.177,0.156 10 false c1

a.

Disconnect the c1 and c2 ECU connectors.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No.
(Symbol)
Wiring Color Terminal Description Condition Specified Condition
c2-2 (+B) - c2-9 (GND2) R - W-B Power source (Battery) Always 11 to 14 V
c2-9 (GND2) - Body ground W-B - Body ground Ground Always Below 1 Ω
c2-10 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
c1-1 (ECUB) - c2-10 (GND) GR - W-B Power source (Battery) Always 11 to 14 V
c1-3 (IG) - c2-9 (GND2) B - W-B Power source (IG) Ignition switch ON 11 to 14 V
Ignition switch off Below 1 V
c1-6 (P) - Body ground*1 W - Body ground Park/neutral position switch signal Ignition switch ON
Shift lever in P
11 to 14 V
Ignition switch ON
Shift lever not in P
Below 1 V

If the result is not as specified, there may be a malfunction on the wire harness side.


c.

Reconnect the c1 and c2 ECU connectors.


d.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No.
(Symbol)
Wiring Color Terminal Description Condition Specified Condition
c2-1 (RCL+) - Body ground B - Body ground Reclining motor operation signal Rear power seat switch RH forward 11 to 14 V
c2-5 (RCL-) - Body ground L - Body ground Reclining motor operation signal Rear power seat switch RH backward 11 to 14 V
c2-8 (FLD+) - Body ground GR - Body ground Cushion motor operation signal No. 1 or No. 2 fold seat switch RH fold 11 to 14 V
c2-7 (FLD-) - Body ground LG - Body ground Cushion motor operation signal No. 1 or No. 2 fold seat switch RH return 11 to 14 V
c1-10 (FLD2) - Body ground GR - Body ground No. 1 fold seat switch signal (Fold) No. 1 fold seat switch RH off 11 to 14 V
No. 1 fold seat switch RH fold Below 1 V
c1-12 (RCLF) - Body ground P - Body ground Reclining forward switch signal Always 11 to 14 V
Rear power seat switch RH forward Below 1 V
c1-13 (RCLR) - Body ground Y - Body ground Reclining backward switch signal Always 11 to 14 V
Rear power seat switch RH backward Below 1 V
c1-14 (RTN2) - Body ground SB - Body ground No. 1 fold seat switch signal (Return) No. 1 fold seat switch RH off 11 to 14 V
No. 1 fold seat switch RH return Below 1 V
c1-15 (RTRN) - Body ground L - Body ground No. 2 fold seat switch signal (Return) No. 2 fold seat switch RH off 11 to 14 V
No. 2 fold seat switch RH return Below 1 V
c1-16 (FOLD) - Body ground V - Body ground No. 2 fold seat switch signal (Fold) No. 2 fold seat switch RH off 11 to 14 V
No. 2 fold seat switch RH fold Below 1 V
c1-17 (SV1) - c1-25 (SG1) P - R Folding position sensor power supply Ignition switch off Below 1 V
Ignition switch ON 5.5 to 8 V
c1-18 (SFLD) - c1-25 (SG1) G - R Folding position sensor signal Motor operating Pulse generation
c1-19 (SRCL) - c1-24 (SG2) LG - W Reclining position sensor signal Motor operating Pulse generation
c1-24 (SG2) - Body ground W - Body ground Reclining position sensor ground Always Below 1 Ω
c1-25 (SG1) - Body ground R - Body ground Folding position sensor ground Always Below 1 Ω
c1-37 (SV2) - c1-24 (SG2) GR - W Reclining position sensor power supply Ignition switch off Below 1 V
Ignition switch ON 5.5 to 8 V
c1-40 (PKB1) - Body ground*2 R - Body ground Parking brake switch signal Parking brake switch off 11 to 14 V
Parking brake switch on Below 1 V

*1: for Automatic Transmission

*2: for Manual Transmission


If the result is not as specified, the ECU may have a malfunction.