Home › Vehicle Interior › SEAT › SEAT MEMORY SWITCH › 2015.06–2017.08
RM27T0E _58 Vehicle Interior _053737 SEAT _0261123 SEAT MEMORY SWITCH G

SEAT  SEAT MEMORY SWITCH  INSPECTION  


PROCEDURE

Hide 84927 1.INSPECT SEAT MEMORY SWITCH (for LHD)

B239587E01
0.802,0.149 0.980,0.342 0.178,0.193 10 *1 2.08,0.149 2.258,0.342 0.178,0.193 10 *2 0.602,2.139 0.780,2.332 0.178,0.193 10 *a 1.014,0.232 1.152,0.232 false 1.152,0.232 1.48,1.106 false 2.077,0.227 1.94,0.227 false 1.94,0.227 1.901,1.137 false 2.626,3.813 2.766,3.957 0.140,0.143 10 E 0.798,3.813 1.039,3.957 0.240,0.143 10 M2 1.958,3.813 2.307,3.957 0.349,0.143 10 MRY 1.459,3.813 1.687,3.957 0.228,0.143 10 M1 2.018,3.307 2.599,3.804 false 1.887,3.312 2.147,3.802 false 1.746,3.315 1.592,3.811 false 1.558,3.316 0.99,3.813 false 2.686,0.149 2.864,0.342 0.178,0.193 10 *3 2.662,0.236 2.524,0.236 false 2.524,0.236 2.297,1.146 false

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
3 (M1) - 1 (E) 1 switch pressed Below 1 Ω
4 (M2) - 1 (E) 2 switch pressed
2 (MRY) - 1 (E) SET switch pressed


If the result is not as specified, replace the seat memory switch.

Text in Illustration
*1 SET Switch
*2 1 Switch
*3 2 Switch
*a Component without harness connected
(Seat Memory Switch)


Hide 84927 2.INSPECT SEAT MEMORY SWITCH (for RHD)

B239588E01
2.521,0.14 2.698,0.333 0.178,0.193 10 *1 1.908,0.14 2.086,0.333 0.178,0.193 10 *2 0.602,2.147 0.780,2.340 0.178,0.193 10 *a 0.842,0.223 0.98,0.223 false 0.98,0.223 1.308,1.097 false 1.905,0.219 1.768,0.219 false 1.768,0.219 1.729,1.128 false 2.626,3.788 2.766,3.931 0.140,0.143 10 E 0.798,3.788 1.039,3.931 0.240,0.143 10 M2 1.958,3.788 2.307,3.931 0.349,0.143 10 MRY 1.459,3.788 1.687,3.931 0.228,0.143 10 M1 2.018,3.299 2.599,3.779 false 1.887,3.304 2.147,3.776 false 1.746,3.306 1.592,3.785 false 1.558,3.308 0.99,3.788 false 0.623,0.14 0.801,0.333 0.178,0.193 10 *3 2.49,0.227 2.352,0.227 false 2.352,0.227 2.125,1.137 false

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
3 (M1) - 1 (E) 1 switch pressed Below 1 Ω
4 (M2) - 1 (E) 2 switch pressed
2 (MRY) - 1 (E) SET switch pressed


If the result is not as specified, replace the seat memory switch.

Text in Illustration
*1 SET Switch
*2 1 Switch
*3 2 Switch
*a Component without harness connected
(Seat Memory Switch)