Home › Vehicle Interior › SEAT › FRONT SEATBACK HEATER (for Manual Seat)
RM27T0E _58 Vehicle Interior _053737 SEAT _0261125 FRONT SEATBACK HEATER(for Manual Seat) A

SEAT  FRONT SEATBACK HEATER(for Manual Seat)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.

·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 87510N 1.INSTALL FRONT SEATBACK HEATER ASSEMBLY LH

B239208E01
2.806,1.186 3.036,1.379 0.230,0.193 10 *1 2.795,1.269 2.629,1.269 2.629,1.269 2.119,2.103 false 2.497,0.798 2.686,0.991 0.188,0.193 10 *2 0.746,1.031 0.927,1.224 0.181,0.193 10 *3 0.949,1.106 1.043,1.106 false 1.043,1.106 1.836,0.637 false 2.475,0.891 2.372,0.891 false 2.372,0.891 1.95,0.715 false 2.626,0.291 2.856,0.484 0.230,0.193 10 *1 2.596,0.388 2.492,0.388 false 2.492,0.388 1.872,0.546 false 2.747,2.02 2.977,2.213 0.230,0.193 10 *4 2.735,2.103 2.569,2.103 2.569,2.103 1.719,2.74 false

a.

Set the seatback heater with the name stamp side facing the seatback cover.

Text in Illustration
*1 Tack Pin
*2 Seatback Cover
*3 Seatback Heater
*4 Name Stamp


b.

Install the seatback heater with new tack pins.


Hide 71074S 2.INSTALL SEPARATE TYPE FRONT SEATBACK COVER

a.

Using hog ring pliers, install the seat cushion cover to the seat cushion pad with new hog rings.

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, avoid wrinkling the cover.



HINT:

The number of hog rings differs according to seat type.


B242231E01
0.352,0.143 0.586,0.335 0.234,0.193 10 *A 2.563,0.143 2.797,0.335 0.234,0.193 10 *B 6.56,0.143 6.795,0.335 0.234,0.193 10 *1 6.531,0.215 6.461,0.215 false 6.461,0.215 6.14,1.252 false

Text in Illustration
*A for Type A *B for Type B
*1 Hog Ring Pliers - -


b.

Attach the 4 claws to install the 2 headrest supports.


c.
B239202

w/ Front Seat Side Airbag:

i.

Connect the seatback cover bracket to the seatback pad.


ii.

Install the seatback cover bracket to the seat frame with the nut.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)

NOTICE:

After the seatback trim cover is assembled, make sure the side airbag strap is not twisted.




d.

Close the 2 fasteners, and then close the seatback cover.

B242233E01
0.874,0.047 1.165,0.231 0.290,0.184 10 *A 4.279,0.047 4.569,0.231 0.290,0.184 10 *B

Text in Illustration
*A for Cloth Seat *B for Leather Seat


e.
B239193E01
2.399,0.107 2.629,0.300 0.230,0.193 10 *1 2.353,0.181 2.187,0.181 2.187,0.181 1.688,1.574 false

Using hog ring pliers, install 3 new hog rings.

Text in Illustration
*1 Hog Ring Pliers


f.

Connect the seat heater connector and attach the wire harness clamp.


g.

Install the rubber band to the seat cushion spring.


Hide 3.INSTALL FRONT SEAT ASSEMBLY

a.