Home › Vehicle Interior › SEAT › REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Tumble Seat Type LH Side) › 2015.06–2021.06
RM27T0E _58 Vehicle Interior _053737 SEAT _0261128 REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Tumble Seat Type LH Side) A

SEAT  REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Tumble Seat Type LH Side)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


PROCEDURE

Hide 71940A 1.REMOVE REAR SEAT HEADREST ASSEMBLY

a.

Remove the headrest.


Hide 71960B 2.REMOVE REAR SEAT CENTER HEADREST ASSEMBLY

a.

Remove the headrest.


Hide 71691H 3.REMOVE REAR NO. 2 SEAT CUSHION HINGE COVER

B240271

a.

Using a moulding remover, detach the 6 claws.


b.

Detach the 2 guides and remove the cover.


Hide 71691E 4.REMOVE REAR NO. 1 SEAT CUSHION HINGE COVER

B240273

a.

Using a moulding remover, detach the 6 claws.


b.

Detach the 2 guides and remove the cover.


Hide 71691K 5.REMOVE REAR NO. 4 SEAT CUSHION HINGE COVER

a.
B240276

Operate the reclining release handle to move the seat into the position shown in the illustration.


b.
B240277

Using a moulding remover, detach the claw and remove the cover.


Hide 71691J 6.REMOVE REAR NO. 3 SEAT CUSHION HINGE COVER

a.
B240278

Using a moulding remover, detach the claw and remove the cover.


Hide 7.REMOVE REAR NO. 1 SEAT ASSEMBLY LH

B240280

a.

Remove the 3 bolts, nut and seat.

NOTICE:

Be careful not to damage the vehicle body.