Home › Vehicle Interior › SEAT › REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Tumble Seat Type LH Side) › 2015.06–2021.06
RM27T0E _58 Vehicle Interior _053737 SEAT _0261128 REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Tumble Seat Type LH Side) A

SEAT  REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Tumble Seat Type LH Side)  DISASSEMBLY  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


PROCEDURE

Hide 71844D 1.REMOVE REAR SEAT RECLINING COVER LH

B241078

a.

Remove the 2 screws.


b.

Using a moulding remover, detach the 2 claws.


c.

Move the cover in the direction of the arrow to detach the guide and remove the cover.


Hide 71833A 2.REMOVE REAR NO. 1 SEAT RECLINING COVER RH

B241100

a.

Remove the 2 screws.


b.

Using a moulding remover, detach the 2 claws.


c.

Move the cover in the direction of the arrow to detach the guide.


d.
B241102

Detach the 2 hooks and remove the cover.


Hide 71324G 3.REMOVE REAR NO. 2 SEAT CUSHION

B241103

a.

Remove the screw and cushion.


Hide 71876K 4.REMOVE REAR RECLINING ADJUSTER INSIDE COVER LH

B241104

a.

Remove the 2 screws.


b.

Detach the 2 claws and remove the cover.


Hide 72205B 5.REMOVE SEAT TRACK OPEN LEVER PIN SUB-ASSEMBLY

B241080

a.

Using a screwdriver, remove the stopper.


b.

Remove the pin as shown in the illustration.

HINT:

Use the same procedure for both pins.



Hide 72779 6.REMOVE REAR SEAT HINGE PAWL GUIDE

B241082

a.

Detach the 4 claws and remove the pawl guide.

HINT:

Use the same procedure for both pawl guides.



Hide 71302D 7.REMOVE REAR SEAT HINGE SUB-ASSEMBLY LH

a.
B241088

Using a screwdriver, remove the E-ring.


b.
B241089

Remove the pin.


c.
B241105

Using a screwdriver, detach the 10 claws.

HINT:

Tape the screwdriver tip before use.



d.
B241106

Remove the 5 screws.


e.

Disconnect the reclining release handle from the under cover.


f.

Raise the under cover.


g.
B241090

Using a screwdriver, remove the spring of the seat stay ball-joint.


h.

Disconnect the seat stay from the seat cushion frame.


i.

Remove the seat hinge and seat stay as a unit.

NOTICE:

The seat stay cannot be disconnected from the seat hinge. If the stay is disconnected from the hinge, replacement of both parts is necessary.


HINT:

If it is necessary to replace the seat hinge, replace it together with the seat stay as the stay cannot be disconnected from the hinge.



Hide 71305C 8.REMOVE REAR SEAT STAY SUB-ASSEMBLY

HINT:
·

As the seat stay cannot be disconnected from the seat hinge, it is removed in the previous step.

·

If it is necessary to replace the seat stay, replace it together with the seat hinge as the stay cannot be disconnected from the hinge.



Hide 71301D 9.REMOVE REAR SEAT HINGE SUB-ASSEMBLY RH

a.
B241083

Using a screwdriver, remove the E-ring.


b.
B241084

Remove the pin and hinge.


Hide 71647G 10.REMOVE REAR SEAT CUSHION EDGE PROTECTOR

B241085

a.

Remove the protector from the cushion frame.

HINT:

Use the same procedure for both protectors.



Hide 78917 11.REMOVE FOLD SEAT LEG LOCK CUSHION

B241086

a.

Remove the cushion from the protector.

HINT:

Use the same procedure for both cushions.



Hide 72649 12.REMOVE REAR SEAT CUSHION SUPPORT SPRING

B242241

a.

Remove the spring from the seat cushion frame.

HINT:

Use the same procedure for both springs.



Hide 72908B 13.REMOVE REAR SEAT CUSHION UNDER COVER SUB-ASSEMBLY LH

a.

Remove the under cover.


Hide 71586 14.REMOVE REAR NO. 2 SEAT HINGE COVER LH

B241049

a.

Detach the 3 claws and remove the cover.


Hide 71585 15.REMOVE REAR NO. 2 SEAT HINGE COVER RH

a.

Detach the 3 claws and remove the cover.


Hide 18.REMOVE SEAT CUSHION COVER WITH PAD

a.
B241092E01
3.047,1.27 3.235,1.440 0.188,0.170 10 *1 3.018,1.374 2.886,1.374 false 2.886,1.374 2.015,0.517 false

Cut off the tack pins and remove the carpet from the cushion pad.

Text in Illustration
*1 Tack Pin


b.
B241107

Remove the hog rings and seat cushion cover with pad.


Hide 71647F 19.REMOVE REAR SEAT INNER CUSHION EDGE PROTECTOR LH

a.
B241111E01
0.171,0.166 0.352,0.341 0.181,0.174 10 *1 0.374,0.252 0.507,0.252 false 0.507,0.252 0.932,0.461 false

Cut off the tack pins and remove the carpet from the cushion pad.

Text in Illustration
*1 Tack Pin


Hide 71076S 20.REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER

a.
B241109

Remove the hog rings and seat cushion cover from the seat cushion pad.


Hide 72996A 21.REMOVE REAR SEATBACK COVER

B237641

a.

Using a screwdriver, detach the 8 claws and remove the 2 covers.

HINT:

Tape the screwdriver tip before use.



Hide 79185 22.REMOVE NO. 1 SEATBACK PAD LH

a.
B241112

Remove the bolt and disconnect the outer belt.


b.
B241113E01
1.616,2.935 1.806,3.116 0.190,0.181 10 *1 1.732,2.92 1.732,1.879 false 1.732,2.789 0.576,2.676 false 1.732,2.789 2.861,2.619 false

Detach the fastening tape and open the cover.

Text in Illustration
*1 Fastening Tape


c.
B242242

Remove the 6 hog rings.


d.
B241114

Open the 2 fasteners, and then open the seatback cover.


e.
B241116

Remove the seatback pad.


Hide 71837D 23.REMOVE REAR SEAT INNER RECLINING COVER RH

B241117

a.

Remove the screw.


b.

Detach the guide and remove the cover.


Hide 72830 24.REMOVE REAR SEAT CENTER ARMREST ASSEMBLY

B241119

a.

Remove the 2 bolts, center armrest and bush.


Hide 71281A 25.REMOVE REAR SEAT CENTER ARMREST HINGE

B241120

a.

Remove the screw and armrest hinge.


Hide 71956C 26.REMOVE REAR SEAT ARMREST SUPPORT

B241121

a.

Remove the armrest support.


Hide 73237A 27.REMOVE SHOULDER BELT ANCHOR COVER

B241122E01
1.721,0.516 1.883,0.669 0.163,0.154 10 *1 1.703,0.619 1.629,0.619 false 1.629,0.619 1.569,1.25 false

a.

Using a screwdriver, detach the 2 claws and 2 guides, and then remove the cover.

HINT:

Tape the screwdriver tip before use.


Text in Illustration
*1 Protective Tape


Hide 73375B 28.REMOVE REAR SEAT SHOULDER BELT HOLE COVER LH

a.
B241124

Detach the 4 claws and remove the cover.


b.
B241125

Disconnect the outer belt.


Hide 72615C 29.REMOVE REAR SEATBACK LOCK STRIKER COVER

B237663E01
2.738,1.099 2.968,1.292 0.230,0.193 10 *1 2.692,1.173 2.526,1.173 2.526,1.173 2.105,1.734 false

a.

Using a screwdriver, detach the claw and guide, and then remove the cover.

HINT:

Tape the screwdriver tip before use.


Text in Illustration
*1 Protective Tape


Hide 72058A 30.REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH

a.
B237665

Remove the 2 screws.


b.
B165025E06
0.625,1.146 0.885,1.375 0.26,0.229 10 false (1) 1.719,2.24 1.958,2.448 0.24,0.208 10 true (2) 1.74,2.76 2,2.99 0.26,0.229 10 false (3)

Disconnect the cable in the order shown in the illustration and remove the lever.


Hide 71931B 31.REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY

B241127

a.

Detach the 8 claws and remove the 4 supports.


Hide 32.REMOVE SEATBACK COVER WITH PAD

a.
B241093

Detach the 2 hooks and remove the seatback cover with pad.


b.
B241129

Disconnect the outer belt from the seatback cover with pad.


Hide 71078S 33.REMOVE SEPARATE TYPE REAR SEATBACK COVER

a.

Remove the hog rings and detach the fastening tape, and then remove the seatback cover from the seatback pad.

B241130E01
5.667,1.405 5.882,1.585 0.215,0.180 10 *1 5.646,1.482 5.562,1.482 false 5.562,1.482 5.312,1.114 false 5.562,1.482 4.427,0.648 false

Text in Illustration
*1 Fastening Tape - -


Hide 71834H 34.REMOVE REAR NO. 1 SEAT RECLINING COVER LH

B241132

a.

Detach the 2 claws and remove the cover.


Hide 71812C 35.REMOVE RECLINING ADJUSTER COVER LH

B241134

a.

Remove the 4 screws.


b.

Detach the 4 claws and remove the cover.


Hide 73187A 36.REMOVE REAR SEAT SHOULDER BELT GUIDE

a.
B241137

Detach the 2 claws and open the cover.


b.
B241138

Disconnect the seat belt from the belt guide.


c.
B241168

Detach the 4 guides and remove the belt guide.


Hide 72620B 38.REMOVE REAR NO. 1 SEAT LOCK CABLE ASSEMBLY

B241136

a.

Detach the 2 cable clamps, and then disconnect the cable and remove it.


Hide 71879F 39.REMOVE REAR SEAT INNER RECLINING COVER LH

B241068

a.

Detach the 2 claws and 2 guides, and then remove the cover.


Hide 71879E 40.REMOVE REAR SEAT RECLINING COVER INNER LH

B241069

a.

Detach the 2 guides and remove the cover.


Hide 71878E 41.REMOVE REAR SEAT RECLINING COVER INNER RH

B241133

a.

Detach the 2 guides and remove the cover.


Hide 72569 42.REMOVE SEATBACK STOPPER PLATE

B241169

a.

Remove the 3 bolts and plate.


Hide 72830B 43.REMOVE REAR CENTER SEAT ARMREST BUSH

B241170

a.

Detach the 3 claws and remove the bush.


Hide 71018 44.REMOVE REAR SEATBACK FRAME SUB-ASSEMBLY LH

B241171

a.

Remove the 4 bolts, bracket and seatback frame.


Hide 72720B 45.REMOVE REAR SEATBACK INNER ADJUSTER ASSEMBLY LH

B241172

a.

Remove the 2 bolts, adjuster and cover.


Hide 73709A 46.REMOVE TETHER ANCHOR BRACKET SUB-ASSEMBLY

B241173

a.

Remove the bolt and bracket.


Hide 78920B 47.REMOVE NO. 1 FOLD SEAT LOCK CONTROL CABLE ASSEMBLY LH

a.
B241174

Cut off the 2 cable ties.


b.
B241175

Detach the 3 cable clamps, and then disconnect the cable and remove it.