Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY(for Bench Seat Type)
RM27T0E _58 Vehicle Interior _053737 SEAT _0261135 FRONT SEAT ASSEMBLY(for Bench Seat Type) A

SEAT  FRONT SEAT ASSEMBLY(for Bench Seat Type)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 1.INSTALL FRONT SEAT ASSEMBLY RH

a.

Place the front seat assembly RH in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



b.
B298189

Pass the front seat lap outer belt sub-assembly through the hole of the front seat cushion to the surface.

NOTICE:

Do not twist the front seat lap outer belt sub-assembly.



c.
B298187E01
2.056,1.756 2.216,1.908 0.159,0.151 10 *1 1.494,1.001 1.926,1.846 false 1.926,1.846 2.047,1.846 false

Pass the front seat lap outer belt sub-assembly through the rubber band of the front seat inner belt assembly RH.

Text in Illustration
*1 Rubber Band

NOTICE:

Do not twist the front seat lap outer belt sub-assembly.



d.

Connect the anchor part of the front seat lap outer belt sub-assembly with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not pinch the carpet.



e.

Connect the connector and attach the wire harness clamp under the seat.


f.

Temporarily install the front seat assembly RH with the 4 bolts.


g.

Operate the seat track adjusting handle and move the front seat assembly RH to the rearmost position.


h.
B294301E01
2.119,0.566 2.344,0.731 0.225,0.165 10 (1) 1.102,1.525 1.327,1.690 0.225,0.165 10 (2)

Tighten the 2 bolts in the order shown in the illustration.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


i.

Operate the seat track adjusting handle and move the front seat assembly RH to the foremost position.


j.
B294300E01
1.153,1.038 1.346,1.201 0.193,0.163 10 (1) 2.336,1.408 2.529,1.571 0.193,0.163 10 (2)

Tighten the 2 bolts in the order shown in the illustration.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


Hide 72157A 2.INSTALL INNER SEAT TRACK BRACKET COVER RH

a.

Attach the 2 claws to install the inner seat track bracket cover RH.


Hide 72137B 3.INSTALL SEAT TRACK COVER RH

a.

Attach the 2 claws to install the seat track cover RH.


Hide 72127A 4.INSTALL FRONT INNER SEAT TRACK BRACKET COVER RH

a.

Operate the seat track adjusting handle and move the front seat assembly RH to the rearmost position.


b.

Attach the 2 claws to install the front inner seat track bracket cover RH.


Hide 72123A 5.INSTALL FRONT OUTER SEAT TRACK BRACKET COVER RH

a.

Attach the 2 claws to install the front outer seat track bracket cover RH.


Hide 71910A 6.INSTALL FRONT SEAT HEADREST ASSEMBLY

a.

Install the front seat headrest assembly.