Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY(for Bench Seat Type)
RM27T0E _58 Vehicle Interior _053737 SEAT _0261135 FRONT SEAT ASSEMBLY(for Bench Seat Type) A

SEAT  FRONT SEAT ASSEMBLY(for Bench Seat Type)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 71910A 1.REMOVE FRONT SEAT HEADREST ASSEMBLY

a.

Remove the front seat headrest assembly.


Hide 72123A 2.REMOVE FRONT OUTER SEAT TRACK BRACKET COVER RH

a.

Operate the seat track adjusting handle and move the front seat assembly RH to the rearmost position.


b.
B294296

Using moulding remover A, detach the 2 claws and remove the front outer seat track bracket cover RH.


Hide 72127A 3.REMOVE FRONT INNER SEAT TRACK BRACKET COVER RH

a.
B294297

Using moulding remover A, detach the 2 claws and remove the front inner seat track bracket cover RH.


Hide 72137B 4.REMOVE SEAT TRACK COVER RH

a.

Operate the seat track adjusting handle and move the front seat assembly RH to the foremost position.


b.
B294298

Using moulding remover A, detach the 2 claws and remove the seat track cover RH.


Hide 72157A 5.REMOVE INNER SEAT TRACK BRACKET COVER RH

a.
B294299

Using moulding remover A, detach the 2 claws and remove the inner seat track bracket cover RH.


Hide 6.REMOVE FRONT SEAT ASSEMBLY RH

a.
B294300

Remove the 2 bolts.


b.

Operate the seat track adjusting handle and move the seat to the rearmost position.


c.
B294301

Remove the 2 bolts.


d.

Disconnect the connector and detach the wire harness clamp from under the seat.


e.
B294017

Remove the bolt and disconnect the anchor part of the front seat lap outer belt sub-assembly.


f.
B298186E01
2.026,1.771 2.186,1.922 0.159,0.151 10 *1 1.464,1.016 1.896,1.86 false 1.896,1.86 2.017,1.86 false

Pass the front seat lap outer belt sub-assembly through the rubber band of the front seat inner belt assembly RH.

Text in Illustration
*1 Rubber Band


g.
B298188

Pull out the front seat lap outer belt sub-assembly through the hole of the front seat cushion, and remove the front seat lap outer belt sub-assembly.


h.

Operate the seat track adjusting handle and move the front seat assembly RH to the center position, and then operate the reclining adjusting handle and move the front seatback to the upright position.


i.

Remove the front seat assembly RH from the vehicle.

NOTICE:

Be careful not to damage the vehicle body.