Home › Vehicle Interior › SEAT BELT › SEAT BELT WARNING SYSTEM › 2015.06–2021.06
RM27T0E _58 Vehicle Interior _053738 SEAT BELT _0261145 SEAT BELT WARNING SYSTEM A

SEAT BELT  SEAT BELT WARNING SYSTEM  CUSTOMIZE PARAMETERS  


PROCEDURE

Hide 1.REMOVE CUSTOMIZE SEAT BELT WARNING SYSTEM

NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Record the current settings before customizing.



a.

Customizing with the intelligent tester

i.

Connect the intelligent tester to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Turn the intelligent tester on.


iv.

Enter the following menus: Utility / Customize Setting.


v.

Select the setting by referring to the table below.

Seat Belt Warning
Display Default Contents Setting
Driver Side Seatbelt Warning Buzzer ON If the driver side seat belt is unfastened and the vehicle is driven at approximately 20 km/h (12.5 mph) or more, the system sounds the seat belt warning buzzer. ON or OFF
Front Passenger Side Seatbelt Warning Buzzer ON If the front passenger side seat belt is unfastened with the front passenger seat occupied and the vehicle is driven at approximately 20 km/h (12.5 mph) or more, the system sounds the seat belt warning buzzer. ON or OFF