Home › Vehicle Interior › SEAT BELT › OCCUPANT DETECTION SENSOR
RM27T0E _58 Vehicle Interior _053738 SEAT BELT _0261147 OCCUPANT DETECTION SENSOR G

SEAT BELT  OCCUPANT DETECTION SENSOR  INSPECTION  


PROCEDURE

Hide 71511S 1.INSPECT SEPARATE TYPE FRONT SEAT CUSHION PAD

C213678

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 3 More than 147 N (15 kgf, 33.0 lbf) applied to occupant detection sensor Below 100 Ω


If the result is not as specified, replace the separate type front seat cushion pad.