Home › Vehicle Interior › SEAT BELT › REAR CENTER SEAT OUTER BELT ASSEMBLY (for 60/40 Split Tumble Seat Type LH Side)
RM27T0E _58 Vehicle Interior _053738 SEAT BELT _0261162 REAR CENTER SEAT OUTER BELT ASSEMBLY(for 60/40 Split Tumble Seat Type LH Side) G

SEAT BELT  REAR CENTER SEAT OUTER BELT ASSEMBLY(for 60/40 Split Tumble Seat Type LH Side)  INSPECTION  


PROCEDURE

Hide 73320A 1.INSPECT NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY LH

B242818E01
1.209,0 1.404,0.211 0.195,0.211 10 *c 2.415,0 2.640,0.202 0.225,0.202 10 *a 0.473,0.527 0.684,0.784 0.211,0.258 10 *b

NOTICE:

Do not disassemble the retractor.


Text in Illustration
*a Unlock
*b Lock
*c 45°

a.

When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is more than 45°, check that the belt locks.

If the operation is not as specified, replace the No. 1 seat 3 point type belt assembly LH.