Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System) › 2015.06–2017.08
RM27T0E _58 Vehicle Interior _053739 HEATING / AIR CONDITIONING _0261169 AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System) D

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)  SYSTEM DESCRIPTION  


GENERAL


a.

The air conditioning system has the following controls.

Control Outline
Neural Network Control This control is capable of performing complex control by artificially simulating the information processing method of the nervous system of living organisms in order to establish a complex input/output relationship similar to that of a human brain.
Outlet Air Temperature Control Based on the temperature set by the temperature control dial, neural network control calculates outlet air temperature based on input signals from various sensors.
Pollen Removal Mode Control
·

When the pollen removal mode switch is pressed, pollen removal mode control is activated and the air vent is switched to the FACE mode.

·

Sends air, which is filtered by the clean air filter to remove pollen, to the area around the upper parts of the bodies of the driver and front passenger.


Left and Right Independent Control The temperature settings for the driver and front passenger are controlled independently in order to provide separate vehicle interior temperatures for the right and left sides of the vehicle.
Blower Control Controls the blower motor in accordance with the airflow volume that has been calculated by neural network control based on the input signals from various sensors.
Air Outlet Control Automatically switches the air outlets in accordance with the outlet mode that has been calculated by neural network control.
In accordance with the engine coolant temperature, ambient air temperature, amount of sunlight, required blower speed, outlet temperature and vehicle speed conditions, this control automatically switches the blower outlet to foot and defroster mode to prevent the windows from becoming fogged up when the ambient air temperature is low.
Air Inlet Control Automatically controls the air inlet control damper to help achieve the calculated outlet air temperature that is required.
Drives the air inlet control servo motor according to the operation of the air inlet control switch and moves the dampers to the fresh or recirculation position.
Compressor Control The air conditioning amplifier assembly compares the A/C pulley speed signals, which are transmitted by the ECM (crankshaft position sensor). When the air conditioning amplifier assembly determines that the A/C pulley is locked, it turns off the magnet clutch assembly.
Defroster Control Defroster control logic is used to improve defroster performance.
Rear Defogger Control When the ignition switch is ON and the rear defogger switch is pushed, the system is activated to keep the defogger heater on for approx. 15 minutes. However, the operating time of the rear defogger can be extended up to approx. 255 minutes when both of the following requirements are met:
·

Ambient Temperature: -3°C (26.6°F) or less

·

Vehicle Speed: 50 km/h (31.1 mph) or more


Diagnosis A Diagnostic Trouble Code (DTC) is stored in memory when the air conditioning amplifier assembly detects a problem with the air conditioning system.



NEURAL NETWORK CONTROL


·

Neural network control collects data under varying environmental conditions and stores it in the air conditioning amplifier assembly. Neural network control uses this data to enhance air conditioning control.

·

Neural network control consists of neurons organized into an input layer, intermediate layer and output layer. The input layer neurons process the input data received from the switches and sensors, which includes the outside temperature, amount of sunlight and room temperature, and outputs this data to the intermediate layer neurons. Based on this data, the intermediate layer neurons adjust the strength of the links among the neurons. The result is then calculated by the output layer neurons in the form of the required outlet temperature, solar correction, target airflow volume and outlet mode control volume. The air conditioning amplifier assembly then controls the servo motors and blower motor in accordance with the control volumes that have been calculated by neural network control.


E185705E12
0.25,4.156 1.344,4.354 1.094,0.198 10 false Input Processing 0.26,4.969 1.26,5.135 1,0.167 10 false Temp. Setting 0.271,5.792 1.177,6.01 0.906,0.219 10 false Sensor Input 0.292,6.531 1.146,6.698 0.854,0.167 10 false Switch Input 0.823,7.5 3.042,7.719 2.219,0.219 10 false : Neural Network Operation Range 3.448,3.177 3.969,3.365 0.521,0.188 10 false Control 2.448,3.542 3.646,3.76 1.198,0.219 10 false Neural Network 2.344,4.021 3.698,4.24 1.354,0.219 10 false Target Outlet Temp. 2.354,4.406 3.708,4.74 1.354,0.333 10 false Amount of Sunlight Correction 2.531,5.115 3.531,5.427 1,0.313 10 false Target Airflow Volume 2.563,5.875 3.396,6.031 0.833,0.156 10 false Outlet Mode 2.583,6.542 3.281,6.708 0.698,0.167 10 false Inlet Mode 2.531,6.938 3.344,7.104 0.813,0.167 10 false Compressor 4.219,4.052 5.125,4.406 0.906,0.354 10 false Temp. Control Correction 4.094,4.698 5.292,5.219 1.198,0.521 10 false Various Types of Airflow Volume Correction 4.104,5.667 5.438,6.021 1.333,0.354 10 false Various Types of Mode Correction 4.094,6.396 5.208,6.76 1.115,0.365 10 false Various Types of Correction 5.74,3.833 6.948,4.031 1.208,0.198 10 false Output Processing 5.76,4.271 6.865,4.625 1.104,0.354 10 false Air Mix Damper Servo 5.854,5.073 6.76,5.219 0.906,0.146 10 false Blower Motor 5.74,5.531 6.896,5.865 1.156,0.333 10 false Mode Damper Servo 5.823,6.99 6.635,7.156 0.813,0.167 10 false Compressor 3.073,0.021 4.406,0.26 1.333,0.24 10 false Intermediate Layer 2.125,0.229 2.927,0.417 0.802,0.188 10 false Input Layer 1.75,0.74 2.75,0.938 1,0.198 10 false Ambient Temp. 1.427,1.375 2.646,1.531 1.219,0.156 10 false Amount of Sunlight 1.885,1.854 2.792,2.052 0.906,0.198 10 false Cabin Temp. 4.385,0.25 5.25,0.406 0.865,0.156 10 false Output Layer 4.667,0.771 6.042,0.958 1.375,0.188 10 false Target Outlet Temp. 5.74,6.333 6.75,6.667 1.01,0.333 10 false Recirculation Damper Servo


POLLEN REMOVAL MODE CONTROL


a.

When the pollen removal mode switch is pressed, the pollen removal mode control is activated. Then, the air vent is switched to the FACE mode and recirculated pollen free air flows in the area around the upper parts of the bodies of the driver and front passenger.

E116944E06
0.123,0.103 1.063,0.293 0.941,0.191 10 Timing Chart: 0.337,1.198 0.910,1.358 0.573,0.161 10 Air Inlet 0.337,2.179 1.012,2.339 0.674,0.161 10 Air Outlet 0.271,3.549 1.187,3.747 0.916,0.198 10 Blower Motor 0.25,4.605 1.237,4.818 0.987,0.214 10 Magnet Clutch 1.475,1.542 1.867,1.712 0.392,0.170 10 Fresh 1.541,2.541 1.867,2.710 0.326,0.170 10 Foot 1.632,3.931 1.868,4.104 0.236,0.173 10 Off 1.632,4.775 1.868,4.948 0.236,0.173 10 Off 1.632,4.484 1.847,4.658 0.215,0.173 10 On 2.616,5.259 2.942,5.442 0.326,0.184 10 Start 3.419,5.259 3.540,5.414 0.121,0.156 10 1 4.095,5.259 4.216,5.414 0.121,0.156 10 2 4.767,5.259 4.888,5.414 0.121,0.156 10 3 6.017,5.259 6.750,5.442 0.732,0.184 10 Time (min.) 1.436,3.472 1.960,3.645 0.524,0.173 10 Medium 1.548,2.125 1.881,2.299 0.333,0.173 10 Face 1.66,3.04 1.835,3.213 0.175,0.173 10 Hi 1.136,1.303 1.968,1.468 0.832,0.165 10 Recirculation 2.677,0.696 4.844,0.866 2.167,0.170 10 Micro Dust and Pollen Filter Mode 5.059,0.696 5.854,0.866 0.795,0.170 10 AUTO Mode 0.137,0.285 0.758,0.507 0.621,0.222 10 (Sample)

i.

When the pollen removal mode switch signal is input to the air conditioning amplifier assembly, the air conditioning amplifier assembly controls the magnet clutch assembly, recirculation damper servo sub-assembly, damper servo sub-assembly (mode damper servo) and blower with fan motor sub-assembly as shown in the timing chart.


ii.

This control usually operates for approximately 3 minutes.


iii.

After this control stops operating, the air conditioning amplifier assembly automatically returns to the mode it was in just before the pollen removal mode switch was pressed.




MODE POSITION AND DAMPER OPERATION


a.

Mode Position and Damper Operation

i.

Front Air Conditioning Unit

U170662E01
0.268,1.775 0.809,1.966 0.541,0.191 10 Fresh 2.34,0.086 3.346,0.277 1.006,0.191 10 Front Defroster 0.372,4.411 1.242,4.602 0.870,0.191 10 Blower Motor 4.627,4.685 5.576,5.087 0.948,0.402 10 Rear Footwell Register Duct 3.676,3.699 4.667,4.096 0.991,0.397 10 Front Footwell Register Duct 6.421,3.699 7.020,4.051 0.599,0.352 10 Side Register 4.919,3.699 5.771,4.046 0.852,0.347 10 Front Center Register 0.878,3.957 1.628,4.148 0.750,0.191 10 Evaporator 3.16,5.985 3.994,6.176 0.833,0.191 10 Heater Core 1.16,1.775 2.087,1.966 0.928,0.191 10 Recirculation 2.585,3.82 2.98,6.065 2.98,6.065 3.117,6.065 false 3.301,5.565 5.094,5.755 1.793,0.191 10 Quick Heater Assembly*2 2.79,3.734 3.12,5.645 3.12,5.645 3.257,5.645 false 5.73,5.351 6.563,5.746 0.833,0.395 10 Rear Face Register*1 1.249,3.963 1.249,3.827 1.249,3.827 2.025,3.416 false 0.325,4.476 0.212,4.476 0.212,4.476 0.822,3.388 false 2.6,6.385 4.182,6.576 1.582,0.191 10 to Front Passenger Side 0.13,4.778 1.052,4.968 0.922,0.191 10 to Driver Side 1.043,4.862 1.304,4.862 1.304,4.862 1.304,5.28 false 4.152,0.768 5.158,0.959 1.006,0.191 10 Front Defroster 0.561,0.768 1.566,0.959 1.006,0.191 10 Front Defroster 0.153,7.42 2.429,7.610 2.276,0.191 10 *1: w/o Rear Air Conditioning System 2.535,7.42 3.870,7.610 1.335,0.191 10 *2: w/ PTC Heater

Function of Main Damper
Control Damper Operation Position Damper Position Operation
Air Inlet Control Damper Fresh A Brings in fresh air.
Recirculation B Recirculates internal air.
Air Mix Control Damper MAX COOL to MAX HOT E - D - C
E' - D' - C'
Varies the mixture of cold air and hot air in order to regulate the temperature continuously from hot to cool.
MAX COOL Damper MAX COOL V Open in the MAX COOL position.
Except MAX COOL W Close in all position except MAX COOL position.
MAX HOT Damper MAX HOT Y Open in the MAX HOT position.
Except MAX HOT X Closed in all position except MAX HOT position.
Mode Control Damper
E264852

Face
F, I, N, T, X (FACE 1)
F, J, N, T, X (FACE 2)
Air blows out of the front center registers, side registers and rear face registers. (FACE 1)
Air blows out of the front center registers, side registers and rear face registers. In addition, air blows out slightly from the front and rear footwell register ducts. (FACE 2)
E264849

Bi-level
G, L, N, T, X Air blows out of the front center registers, side registers, rear face registers and front and rear footwell register ducts.
E264850

Foot
H, M, P, T, W, Y (MAX HOT position)
H, M, O, T, X (Except MAX HOT Position)
Air blows out of the front and rear footwell register ducts.
In addition, air blows out slightly from the front defroster, side registers, front center registers and rear face registers.
E264851

Foot/Def
H, K, R, T, W, Y (MAX HOT position)
H, M, Q, T, X (Except MAX HOT Position)
Defrosts the windshield through the front defroster and side registers while air is also blown out from the front and rear footwell register ducts.
In addition, air blows out slightly from the front center registers and rear face registers.
E264847

Def
H, I, S, U, X Defrosts the windshield through the front defrosters.


ii.

Rear Air Conditioning Unit (w/ Rear Air Conditioning System)

U116434E01
0.856,2.601 2.074,2.785 1.218,0.184 10 Rear Blower Motor 2.67,3.182 3.402,3.359 0.732,0.177 10 Evaporator 1.255,0.373 2.633,0.571 1.378,0.198 10 Rear Heater Radiator 3.435,0.269 4.133,0.620 0.698,0.350 10 Rear Side Register 4.59,0.506 5.444,0.815 0.855,0.309 10 Rear Roof Register 3.539,1.13 3.715,1.307 0.177,0.177 10 C 3.842,1.244 4.001,1.403 0.159,0.159 10 B 4.127,1.326 4.273,1.513 0.145,0.187 10 A 4.463,1.592 4.593,1.750 0.130,0.158 10 C 4.691,1.729 4.837,1.901 0.146,0.172 10 B 4.94,1.956 5.066,2.156 0.126,0.199 10 A 4.764,1.929 4.925,2.118 0.161,0.189 10 D 4.384,2.026 4.564,2.234 0.180,0.208 10 E 3.637,1.601 3.774,1.769 0.137,0.168 10 E 3.637,1.816 3.800,1.979 0.163,0.163 10 D 2.378,1.868 1.416,2.377 false 1.416,2.377 1.416,2.601 false 3.896,2.634 2.995,3.026 false 2.995,3.026 2.995,3.182 false 3.322,1.167 2.817,0.448 false 2.817,0.448 2.628,0.448 false

Function of Main Damper
Control Damper Operation Position Damper Position Operation
Mode Control Damper
E264852

Face
A Air blows out from the rear roof registers.
E264849

Bi-level
B Air blows out from the rear roof registers and rear side registers.
E264850

Foot
C Air blows out from the rear side registers.
Air Mix Control Damper MAX COLD to MAX HOT Temperature Setting D, E Varies the mixture of cold air and hot air in order to regulate the temperature continuously from hot to cold.




AIR OUTLETS AND AIRFLOW VOLUME


a.

Air Outlets and Airflow Volume

i.

for Front Registers

E195804E04
1.417,2.833 1.635,3.031 0.219,0.198 0.167,5.385 2.458,5.542 2.292,0.156 10 false *: w/o Rear Air Conditioning System 3.49,1.927 3.635,2.104 0.146,0.177 10 true A 1.521,3.677 1.667,3.854 0.146,0.177 10 true C 4.271,2.979 4.417,3.156 0.146,0.177 10 true C 5.219,1.802 5.365,1.979 0.146,0.177 10 false B 1.469,2.865 1.615,3.042 0.146,0.177 10 false B 1.563,0.917 1.708,1.094 0.146,0.177 10 false F 2.177,0.781 2.323,0.958 0.146,0.177 10 false F 2.844,0.625 2.99,0.802 0.146,0.177 10 false F 3.073,2.01 3.219,2.188 0.146,0.177 10 false A 0.417,2.385 0.563,2.563 0.146,0.177 10 false F 5.365,1.146 5.51,1.323 0.146,0.177 10 false F 1.917,3.604 2.063,3.781 0.146,0.177 10 true C 3.885,3.135 4.031,3.313 0.146,0.177 10 true C 4.917,4.031 5.125,4.208 0.208,0.177 10 true D* 3.198,5.146 3.344,5.323 0.146,0.177 10 false E 5.25,4.573 5.396,4.75 0.146,0.177 10 false E

Indication
(Mode)
Front Center Register Side Register Front Footwell Register Rear Face Register* Rear Footwell Register Front Defroster
A B C D E F
E264852

Face 1
E331836

E331836

-
E331838

- -
E264852

Face 2
E331836

E331836

E331839

E331838

E331839

-
E264849

Bi-level
E331837

E331837

E331837

E331838

E331838

-
E264850

Foot
E331839

E331839

E331836

E331839

E331837

E331839

E264851

Foot/Def
E331839

E331839

E331837

E331839

E331837

E331838

E264847

Def
- - - - -
E331836


*: w/o Rear Air Conditioning System


HINT:
·

The size of the circle indicates the proportion of airflow volume.

·

The same system is used for LHD and RHD vehicles.




ii.

for Rear Registers (w/ Rear Air Conditioning System)

E195803E03
3.135,2.052 3.281,2.229 0.146,0.177 10 false A 2.396,1.792 2.542,1.969 0.146,0.177 10 true A 4.51,1.604 4.656,1.781 0.146,0.177 10 true A 3.76,1.344 3.906,1.521 0.146,0.177 10 true A 4.281,2.76 4.427,2.938 0.146,0.177 10 true B 4.375,2.281 4.521,2.458 0.146,0.177 10 true B

Indication
(Mode)
Rear Roof Register Rear Side Register
A B
E264852

Face
E331836

-
E264849

Bi-level
E331838

E331839

E264850

Foot
-
E331837


HINT:

The size of the circle ○ indicates the ratio of airflow volume.





A/C LOCK SENSOR


The A/C lock sensor sends compressor pulley speed signals to the air conditioning amplifier assembly. The air conditioning amplifier assembly determines whether the cooler compressor assembly is locked or not by using those signals and engine speed signals.


No. 1 COOLER THERMISTOR


The No. 1 cooler thermistor detects the temperature of the cool air immediately after it passes through the evaporator in the form of resistance changes, and outputs the temperature to the air conditioning amplifier assembly.


BLOWER WITH FAN MOTOR SUB-ASSEMBLY


The blower with fan motor sub-assembly has a built-in blower controller and is controlled by the air conditioning amplifier assembly using duty control.


AIR CONDITIONING HARNESS ASSEMBLY (BUS CONNECTOR)


a.

A BUS connector is used in the wire harness that connects the servo motor to the air conditioning amplifier assembly.

E195802E01
0.162,0.073 0.917,0.333 0.756,0.260 12 for LHD: 0.162,2.595 0.917,2.855 0.756,0.260 12 for RHD: 0.564,1.082 0.831,1.275 0.267,0.193 10 *1 2.889,0.087 3.156,0.280 0.267,0.193 10 *3 1.849,0.311 2.116,0.504 0.267,0.193 10 *2 5.046,0.89 5.313,1.083 0.267,0.193 10 *4 2.818,0.524 2.744,0.155 2.744,0.155 2.842,0.155 false 4.988,1.439 4.905,0.958 4.905,0.958 5.003,0.958 false 1.77,0.78 1.7,0.379 1.7,0.379 1.798,0.379 false 0.469,1.551 0.398,1.149 0.398,1.149 0.496,1.149 false 6.554,0.946 6.821,1.139 0.267,0.193 10 *5 6.496,1.495 6.414,1.014 6.414,1.014 6.512,1.014 false 2.956,2.265 3.223,2.458 0.267,0.193 10 *6 2.941,2.067 2.79,2.333 2.79,2.333 2.888,2.333 false 0.452,3.926 0.719,4.119 0.267,0.193 10 *7 0.357,4.395 0.286,3.993 0.286,3.993 0.384,3.993 false 1.09,3.495 1.357,3.687 0.267,0.193 10 *6 0.995,3.964 0.925,3.562 0.925,3.562 1.023,3.562 false 3.086,3.183 3.353,3.376 0.267,0.193 10 *8 3.014,3.62 2.94,3.251 2.94,3.251 3.038,3.251 false 5.036,2.665 5.303,2.858 0.267,0.193 10 *4 4.978,3.213 4.896,2.733 4.896,2.733 4.994,2.733 false 6.736,3.916 7.003,4.109 0.267,0.193 10 *5 6.678,4.465 6.596,3.984 6.596,3.984 6.694,3.984 false 3.53,4.853 3.797,5.046 0.267,0.193 10 *2 3.515,4.654 3.364,4.92 3.364,4.92 3.462,4.92 false

Connector Type Connected to
*1: Bus connector Damper servo sub-assembly LH (driver side air mix damper servo)
*2: Bus connector Damper servo sub-assembly LH (mode damper servo)
*3: Bus connector Damper servo sub-assembly RH (front passenger side air mix damper servo)
*4: Bus connector Recirculation damper servo sub-assembly
*5: Connector Air conditioning amplifier assembly
*6: Connector No. 1 cooler thermistor
*7: Bus connector Damper servo sub-assembly RH (driver side air mix damper servo)
*8: Bus connector Damper servo sub-assembly LH (front passenger side air mix damper servo)


b.

Each BUS connector has a built-in communication/driver IC which communicates with each servo motor connector, actuates the servo motor, and has a position detection function.

E187730E10
4.656,1 4.823,0.365 4.823,0.365 5.073,0.365 true 4.51,0.833 4.438,0.49 4.438,0.49 4.208,0.49 false 0.583,2.448 2.885,2.656 2.302,0.208 10 false Air Conditioning Amplifier Assembly 1.031,0.885 2.073,1.26 1.042,0.375 10 false Communication Circuit 1.438,1.938 1.76,2.094 0.323,0.156 10 false CPU 3.208,0.406 4.198,0.573 0.99,0.167 10 false BUS Connector 5.115,0.281 6.729,0.448 1.615,0.167 10 false Communication/Driver IC 5.844,1.615 6.625,1.792 0.781,0.177 10 false Servo Motor



SERVO MOTOR


a.

The pulse pattern type servo motor detects the relative position using 2-bit on/off signals.

The forward and reverse revolutions of this motor are detected using two signals, A and B, which output four types of patterns. The air conditioning amplifier assembly counts the number of pulse patterns in order to determine the stopped position.

E187731E01
2.517,2.977 3.400,3.168 0.883,0.191 10 Pattern Width 4.738,4.038 6.011,4.229 1.273,0.191 10 Pattern Width 2.81° 0.456,0.683 1.811,1.045 1.355,0.362 10 Rotation Direction of Printed Board 5.27,0.335 6.624,0.697 1.355,0.362 10 Rotation Direction of Printed Board 6,2.053 7.129,2.418 1.129,0.365 10 Pattern (Conductive Part) 6.141,1.362 7.056,1.551 0.915,0.189 10 Printed Board 2.605,1.065 3.885,1.235 1.280,0.170 10 Fixed Contact Point 0.34,3.051 0.687,3.220 0.347,0.169 10 GND 3.649,1.879 3.996,2.048 0.347,0.169 10 GND 3.956,2.716 4.116,2.885 0.160,0.169 10 Hi 3.956,2.885 4.130,3.054 0.174,0.169 10 Lo 3.956,3.212 4.116,3.381 0.160,0.169 10 Hi 3.956,3.417 4.130,3.586 0.174,0.169 10 Lo 0.544,2.692 0.672,2.859 0.129,0.167 10 A 0.544,2.331 0.672,2.498 0.129,0.167 10 B 3.875,1.524 4.004,1.691 0.129,0.167 10 A 3.777,2.762 3.906,2.928 0.129,0.167 10 A 3.875,2.228 4.004,2.394 0.129,0.167 10 B 3.777,3.334 3.906,3.501 0.129,0.167 10 B 2.02,2.617 2.02,0.782 2.02,0.782 1.839,0.782 false 4.255,1.594 3.994,1.594 false 4.255,1.941 3.994,1.941 false 4.255,2.291 3.994,2.291 false 4.9,1.149 4.9,0.428 4.9,0.428 5.217,0.428 false 5.845,1.44 6.111,1.44 false 5.874,1.935 6.155,1.935 6.155,1.935 6.155,2.041 false



QUICK HEATER ASSEMBLY (w/ PTC Heater)


a.

General

i.

The PTC heater is located above the heater core in the air conditioner unit.


ii.

The PTC heater consists of a PTC element, aluminum fins and brass plates. When current is applied to the PTC element, it generates heat to warm the air that passes through the unit.

E321145E01
5.128,0.274 5.856,0.456 0.727,0.181 10 Brass Plate 5.578,2.178 6.445,2.359 0.866,0.181 10 Aluminum Fin 1.497,2.364 2.965,2.712 1.468,0.348 10 Quick Heater Assembly (PTC Heater) 4.249,1.006 5.092,1.188 0.843,0.181 10 PTC Element 5.81,1.089 5.14,1.089 false 5.901,0.349 6.065,0.349 6.065,0.349 6.065,0.828 false 6.052,1.727 6.052,2.149 false 2.135,1.91 2.135,2.332 false



b.

PTC Heater Operating Conditions

i.

The on/off operation of the PTC heater is controlled by the air conditioning amplifier assembly in accordance with the engine coolant temperature, ambient temperature, engine speed, air mix setting and electrical load (generator power ratio).

For example, the number of operating PTC heaters varies according to engine coolant temperature as shown in the graph below.

E145149E05
0.233,1.059 2.530,1.252 2.297,0.193 10 Number of PTC Heaters Operating 0.207,0.117 2.195,0.354 1.988,0.237 12 Heater Operation Pattern: 5.795,3.128 6.852,3.541 1.056,0.414 10 Engine Coolant Temperature 2.563,1.5 2.692,1.669 0.129,0.169 10 3 2.563,1.881 2.692,2.050 0.129,0.169 10 2 2.563,2.252 2.692,2.421 0.129,0.169 10 1 2.563,2.643 2.692,2.812 0.129,0.169 10 0 3.12,3.116 3.323,3.285 0.202,0.169 10 73 3.622,3.116 3.824,3.285 0.202,0.169 10 76 4.11,3.116 4.312,3.285 0.202,0.169 10 79 4.594,3.116 4.797,3.285 0.202,0.169 10 82 5.112,3.116 5.314,3.285 0.202,0.169 10 °C 3.078,3.392 3.386,3.560 0.308,0.169 10 163 3.58,3.392 3.869,3.560 0.290,0.169 10 169 4.068,3.392 4.345,3.564 0.278,0.172 10 174 4.552,3.392 4.841,3.560 0.288,0.169 10 180 5.112,3.392 5.399,3.560 0.287,0.169 10 °F




VISCOUS WITH MAGNET CLUTCH HEATER ASSEMBLY (w/ Viscous Heater)


a.

The viscous with magnet clutch heater assembly, which is located on top of the engine, is driven by a drive belt. Pressing the heater switch assembly provided in the instrument panel engages the magnetic clutch, causing the rotor in the viscous with magnet clutch heater assembly to rotate and the silicon oil to mix. The shear heat that is thus generated heats the coolant.


b.

The viscous with magnet clutch heater assembly is controlled in accordance with the engine speed, coolant temperature and ambient temperature. While the power heater is engaged, the engine idling speed is raised to a predetermined value whenever the shift lever is in N or D.



COOLER THERMISTOR (ROOM TEMPERATURE SENSOR)


The cooler thermistor (room temperature sensor) detects the cabin temperature based on changes in the resistance of its built-in thermistor and sends a signal to the air conditioning amplifier assembly.


COOLER THERMISTOR (AMBIENT TEMPERATURE SENSOR)


The cooler thermistor (ambient temperature sensor) detects the outside temperature based on changes in the resistance of its built-in thermistor and sends a signal to the air conditioning amplifier assembly.


AUTOMATIC LIGHT CONTROL SENSOR (SOLAR SENSOR)


a.

The automatic light control sensor (solar sensor) consists of a photo diode, 2 amplifier circuits for the solar sensor and a frequency converter circuit for the light control sensor.


b.

The automatic light control sensor (solar sensor) detects (in the form of changes in the current that flows through the built-in photo diode) the changes in the amount of sunlight from the LH and RH sides (2 directions) and outputs these sunlight intensity signals to the air conditioning amplifier assembly.

E116951E16
1.5,2.01 1.083,2.74 1.083,2.74 0.823,2.74 false 0.198,1.073 0.719,1.24 0.521,0.167 10 false LH Side 2.333,1.083 2.875,1.25 0.542,0.167 10 false RH Side 0.281,2.656 0.833,3 0.552,0.344 10 false Sensing Portion 3.531,3.771 4.74,3.938 1.208,0.167 10 false to Main Body ECU 5.323,3.792 7.094,4.167 1.771,0.375 10 false to Air Conditioning Amplifier Assembly 3.01,0.563 5.219,0.74 2.208,0.177 10 false Internal Circuit of the Solar Sensor 4.25,1.052 5.052,1.219 0.802,0.167 10 false Photo Diode 3.479,1.854 4.604,2.177 1.125,0.323 10 false Frequency Converter Circuit 5.26,1.854 6.26,2.208 1,0.354 10 false Amplifier Circuit (LH) 5.26,2.656 6.26,3.01 1,0.354 10 false Amplifier Circuit (RH)