Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System) › 2015.06–2017.08
RM27T0E _58 Vehicle Interior _053739 HEATING / AIR CONDITIONING _0261169 AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System) D

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)  DIAGNOSIS SYSTEM  


DESCRIPTION


a.

Air conditioning system data and Diagnostic Trouble Codes (DTCs) can be read through the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning, use the intelligent tester to check for malfunctions and perform troubleshooting.




LIST OF OPERATION METHODS


a.

By operating each of the air conditioning control switches as shown in the diagram below, it is possible to enter diagnostic check mode.

U150453E03
1.042,2.833 3.573,3.156 2.531,0.323 10 false Indicator Check (continuous operation) 1.031,3.49 2.74,4.073 1.708,0.583 10 false DTC Check (sensor check) (continuous operation) 1.021,4.813 2.729,5.396 1.708,0.583 10 false DTC Check (sensor check) (step operation) 1.042,6.094 2.896,6.469 1.854,0.375 10 false Check mode is canceled and A/C control starts 0.635,6.802 2.823,7.063 2.188,0.26 10 false : Indicates Switch Operation 0.563,7.323 2.625,7.542 2.063,0.219 10 false *: Driver Temperature Up Switch 0.49,3.49 0.854,3.698 0.365,0.208 10 false OFF 0.479,4.729 0.844,4.938 0.365,0.208 10 false OFF 3.156,4.26 3.365,4.469 0.208,0.208 10 false * 1.688,0.688 3.26,0.896 1.573,0.208 10 false Ignition switch ACC 1.76,0.146 3.333,0.354 1.573,0.208 10 false Ignition switch off 2.438,1.031 4.521,1.24 2.083,0.208 10 false Wait for 5 seconds or more. 3.938,4.813 4.385,5.01 0.448,0.198 10 false AUTO 4.708,1.458 6.698,2.073 1.99,0.615 10 false If both AUTO and recirculation/fresh switches are not pressed at same time 1.438,1.448 3.219,2.042 1.781,0.594 10 false Turn ignition switch to ON while pressing AUTO and recirculation/fresh switches 2.563,5.594 3.021,5.75 0.458,0.156 10 false UP Dr 2.563,4.281 3.021,4.438 0.458,0.156 10 false UP Dr 3.167,5.563 3.375,5.771 0.208,0.208 10 false *



INDICATOR CHECK


E329725E01
0.039,0 0.850,0.209 0.811,0.209 12 for LHD: 0.039,2.332 0.850,2.541 0.811,0.209 12 for RHD:

a.

Turn the ignition switch off.


b.

Turn the ignition switch to ACC and wait at least 5 seconds.


c.

Press and hold the air conditioning control "AUTO" switch and "recirculation/fresh" switch simultaneously, and turn the ignition switch to ON. Continue holding the 2 switches until panel diagnosis mode begins.


d.
E106865E05
0.231,0.547 1.589,0.765 1.359,0.218 10 Blinking Pattern: 0.875,3.002 1.534,3.205 0.659,0.203 10 4 times 0.892,1.121 1.550,1.333 0.657,0.212 10 1 second 1.838,1.13 2.484,1.349 0.646,0.219 10 1 second 0.391,1.804 0.808,2.034 0.417,0.230 10 On 0.377,2.454 0.631,2.665 0.254,0.212 10 Off

Check that all indicators turn on and off 4 times in succession at 1 second intervals.

HINT:
·

After the indicator check is completed, the system enters DTC check mode automatically.

·

Press the "OFF" switch to cancel the check mode.





DTC CHECK (SENSOR CHECK)


E329726E01
0.033,0 0.773,0.248 0.739,0.248 12 for LHD: 0.807,0.272 2.717,0.451 1.911,0.179 10 Driver Temperature Up Switch 0.68,1.052 0.68,0.369 0.68,0.369 0.772,0.369 false 1.185,1.63 2.021,1.809 0.836,0.179 10 OFF Switch 1.058,1.31 1.058,1.727 1.058,1.727 1.15,1.727 false 0.033,2.145 0.879,2.394 0.846,0.248 12 for RHD: 1.248,2.271 2.487,2.619 1.239,0.348 10 Driver Temperature Up Switch 2.892,3.31 2.892,2.363 2.892,2.363 2.783,2.363 false 1.322,3.933 2.159,4.112 0.836,0.179 10 OFF Switch 2.411,3.613 2.411,4.03 2.411,4.03 2.336,4.03 false

a.

Start the engine and warm it up.


b.

Perform the indicator check.

HINT:

After the indicator check is completed, the system enters DTC check mode automatically.



c.

Read the code displayed on the panel.

NOTICE:

In sensor check mode, which is automatically entered after indicator check mode, troubleshooting may be only partially completed.


HINT:

Refer to the Diagnostic Trouble Code Chart for details of the codes (See page Vehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)>DIAGNOSTIC TROUBLE CODE CHART).

·

When there are no problems, DTC 00 is output.

·

As an example, the illustration shows that DTC 23 is output.




d.

If the codes are difficult to read because they change automatically, operate the driver temperature up switch to display the codes one at a time so that they can be read easily. The items are displayed one by one each time the driver temperature up switch is operated.

HINT:

Push the "OFF" switch to finish panel diagnosis.