Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System) › 2015.06–2017.08
RM27T0E _58 Vehicle Interior _053739 HEATING / AIR CONDITIONING _0261169 AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System) A

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)  CUSTOMIZE PARAMETERS  


PROCEDURE

Hide 1.CUSTOMIZE AIR CONDITIONING SYSTEM

HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Record the current settings before customizing.



a.

Customizing with intelligent tester.

i.

Connect the intelligent tester to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Turn the intelligent tester on.


iv.

Enter the following menus: Body / Air Conditioner / Utility / Customize.


v.

Select the setting by referring to the table below.

Air Conditioner
Display Default Contents Setting
Set Temperature Shift Normal Function to set the temperature shift. +2 C, +1 C, Normal, -1 C or -2 C
Compressor Mode Automatic Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C is off. Automatic or Manual
Air Inlet Mode Automatic Function to automatically change to recirculation mode when the A/C is turned on. Automatic or Manual
Foot/DEF Auto Mode ON Function to turn on the airflow from the front and rear footwell register ducts and front defroster automatically when auto mode is on. ON or OFF
Foot/DEF Automatic Blow Up Function ON Function to change the blower level automatically when the front defroster is on. ON or OFF
Add Foot Air in FACE Mode ON When the FACE mode is selected, an additional amount of air is blown to the foot area. ON or OFF
Outside Air Mode Auto Switch Function ON Function to automatically change the air inlet to FRESH mode when the vehicle is parked ON or OFF



b.

Customizing with Multi-display

i.

Turn the ignition switch to ON.


ii.

Select the following menus: Setup / Vehicle / Vehicle Customization.


iii.

Select the setting by referring to the table below.

Climate settings
Display Default Content Setting Relevant ECU
Smog Sensor Sensitivity 0
(middle bar)
Function to change the sensitivity of the exhaust gas sensor. +3, +2, +1, 0, -1, -2 or -3 Air conditioning amplifier assembly
Auto A/C Mode On Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C is off. On or Off Air conditioning amplifier assembly
Efficient Ventilation Mode On In case of turning the A/C on to cool the cabin down quickly, this function changes the mode automatically to recirculation air mode On or Off Air conditioning amplifier assembly