Home › Vehicle Interior › HEATING / AIR CONDITIONING › REAR AIR CONDITIONING UNIT › 2015.06–2016.08
RM27T0E _58 Vehicle Interior _053739 HEATING / AIR CONDITIONING _0261176 REAR AIR CONDITIONING UNIT A

HEATING / AIR CONDITIONING  REAR AIR CONDITIONING UNIT  DISASSEMBLY  


PROCEDURE

Hide 87217G 1.REMOVE REAR SIDE NO. 4 AIR DUCT (w/ Rear Air Duct)

a.
B236606

Remove the 3 screws and duct.


Hide 87106W 2.REMOVE REAR AIR MIX DAMPER SERVO SUB-ASSEMBLY

a.
B236611

Disconnect the connector.


b.

Remove the 2 screws and damper servo.


Hide 3.REMOVE COOLER BRACKET

a.
B240509

Remove the 4 screws and bracket.


Hide 87106X 4.REMOVE REAR MODE DAMPER SERVO SUB-ASSEMBLY

a.
B236613

Disconnect the connector.


b.

Remove the 2 screws and damper servo.

NOTICE:

After removing the damper servo, do not move the gear of the servo unit.



Hide 88710A 5.REMOVE AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY

a.
B236607

Remove the packing.


b.
B236608

Detach the 3 claws and remove the cover.


c.

Remove the bolt and 2 screws.


d.

Using pliers, grip the claws of the clips and slide the 2 clips.


e.

Detach the clamp.


f.

Disconnect the drain hose.


g.

Remove the air conditioning tube and accessory assembly.


h.

Remove the 2 O-rings from the air conditioning tube and accessory assembly.


Hide 87107B 6.REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY

a.
B236614

Remove the screw.


b.

Detach the claw and open the heater clamp.


c.
B236615

Remove the heater radiator.


d.
B236616

Detach the 2 claws and remove the heater clamp.


Hide 7.REMOVE HEATER BRACKET

a.
B236617

Remove the 3 screws and bracket.


Hide 87103D 8.REMOVE REAR BLOWER WITH FAN MOTOR SUB-ASSEMBLY

a.
B236618

Remove the 3 screws and rear blower with fan motor.


Hide 9.REMOVE BLOWER MOTOR CONTROLLER

a.
B236619

Remove the 2 screws and blower motor controller.


Hide 88515B 10.REMOVE REAR COOLING UNIT EXPANSION VALVE

a.
B236610

Detach the 2 clamps.


b.
B236609

Detach the 3 clamps and disconnect the air conditioning wiring harness from the rear cooling unit case.


c.
B236620

Remove the 12 screws and rear cooling unit case LH.


d.
B236621

Using a 4 mm hexagon wrench, remove the 2 hexagon bolts.


e.
B236622

Remove the expansion valve.


Hide 88501R 11.REMOVE REAR EVAPORATOR SUB-ASSEMBLY

a.
B236623

Remove the evaporator from the rear cooling unit case RH.


b.
E131047

Remove the 2 O-rings from the evaporator.


Hide 82210K 12.REMOVE REAR EVAPORATOR TEMPERATURE SENSOR

a.
B236625

Move the tip of the sensor in the direction indicated by the arrow in the illustration to remove it from the bracket plate.


b.

Detach the 2 claws and remove the sensor.


Hide 82210K 13.REMOVE AIR CONDITIONING HARNESS ASSEMBLY