Home › Vehicle Interior › HEATING / AIR CONDITIONING › REAR AIR CONDITIONING UNIT › 2015.06–2016.08
RM27T0E _58 Vehicle Interior _053739 HEATING / AIR CONDITIONING _0261176 REAR AIR CONDITIONING UNIT A

HEATING / AIR CONDITIONING  REAR AIR CONDITIONING UNIT  REASSEMBLY  


PROCEDURE

Hide 82210K 1.INSTALL AIR CONDITIONING HARNESS ASSEMBLY

Hide 82210K 2.INSTALL REAR EVAPORATOR TEMPERATURE SENSOR

a.
B239707

Attach the 2 claws to install the sensor.


b.

Move the tip of the sensor in the direction indicated by the arrow in the illustration to install it to the bracket plate.


Hide 88501R 3.INSTALL REAR EVAPORATOR SUB-ASSEMBLY

a.

Sufficiently apply compressor oil to 2 new O-rings and the fitting surface of the hose joint.

Compressor oil:

ND-OIL 8 or equivalent



b.

Install the 2 O-rings to the evaporator.


c.

Install the evaporator to the rear cooling unit case RH.


Hide 88515B 4.INSTALL REAR COOLING UNIT EXPANSION VALVE

a.
B239709

Install the expansion valve.


b.

Using a 4 mm hexagon wrench, install the 2 hexagon bolts.

Torque:
3.5 N*m (36 kgf*cm, 31 in.*lbf)


c.

Install the rear cooling unit case LH with the 12 screws.


d.

Attach the 3 clamps.


e.

Attach the 2 clamps and install the air conditioning wiring harness to the rear cooling unit case.


Hide 87165C 5.INSTALL BLOWER MOTOR CONTROLLER

a.

Install the blower motor controller with the 2 screws.


Hide 87103D 6.INSTALL REAR BLOWER WITH FAN MOTOR SUB-ASSEMBLY

a.

Install the rear blower with fan motor with the 3 screws.


Hide 7.INSTALL HEATER BRACKET

a.

Install the bracket with the 3 screws.


Hide 87107B 8.INSTALL HEATER RADIATOR UNIT SUB-ASSEMBLY

a.

Attach the 2 claws to install the heater clamp.


b.
B239710

Install the radiator unit to the rear cooling unit.


c.

Attach the claw to close the heater clamp.


d.

Install the screw.


Hide 88710A 9.INSTALL AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY

a.
E349889

Sufficiently apply compressor oil to 2 new O-rings and the fitting surface of the hose joint.

Compressor oil:

ND-OIL 8 or equivalent



b.

Install the 2 O-rings to the air conditioning accessory assembly.


c.

Install the air conditioning accessory assembly.


d.

Align the white marks on the hoses with the black marks on the pipes and install the air conditioning accessory assembly to the rear cooling unit.


e.

Using pliers, grip the claws of the clips and slide the 2 clips.

NOTICE:

When installing the clips, align the protruding parts of the clips with the white marks of the hoses.



f.

Attach the clamp.


g.

Install the bolt and 2 screws.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


h.

Attach the 3 claws to install the cover.


i.

Align the cutout of the hose with the protrusion of the unit and connect the drain hose.


j.

Install new packing.


Hide 87106X 10.INSTALL REAR MODE DAMPER SERVO SUB-ASSEMBLY

a.
B243411E03
2.323,2.833 1.604,2.833 true 2.51,2.552 1.802,2.552 1.802,2.552 1.802,2.833 true 1.385,2.74 1.563,2.885 0.177,0.146 10 false *a

Align the damper servo as shown in the illustration and install it with the 2 screws.


b.

Connect the connector.

Text in Illustration
*a Alignment Point


Hide 11.INSTALL COOLER BRACKET

a.

Install the bracket with the 4 screws.


Hide 87106W 12.INSTALL REAR AIR MIX DAMPER SERVO SUB-ASSEMBLY

a.
B240506E02
2.385,2.729 1.635,2.729 true 1.406,2.646 1.604,2.844 0.198,0.198 10 false *a

Position the air mix damper servo so that the large tooth of the gear engages with the cutout part as shown in the illustration and install the air mix damper servo with the 2 screws.


b.

Connect the connector.

Text in Illustration
*a Alignment Point


Hide 87217G 13.INSTALL REAR SIDE NO. 4 AIR DUCT (w/ Rear Air Duct)

a.

Install the duct with the 3 screws.