87710G
1.INSPECT QUICK HEATER ASSEMBLY
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| A-1 - B-1 | 23 to 25°C (73 to 77°F) | 0.5 to 2.5 Ω |
| A-2 - B-1 | 23 to 25°C (73 to 77°F) | 0.5 to 2.5 Ω |
| A-2 - C-1 | 23 to 25°C (73 to 77°F) | 0.5 to 2.5 Ω |
| A-3 - C-1 | 23 to 25°C (73 to 77°F) | 0.5 to 2.5 Ω |
If the result is not as specified, replace the quick heater assembly.
| *1 | Connector A |
| *2 | Connector B |
| *3 | Connector C |
| *a | Component without harness connected
(Quick Heater Assembly) |