Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR (for 1GR-FE)
RM27T0E _58 Vehicle Interior _053739 HEATING / AIR CONDITIONING _0261179 COMPRESSOR(for 1GR-FE) G

HEATING / AIR CONDITIONING  COMPRESSOR(for 1GR-FE)  INSPECTION  


PROCEDURE

Hide 88410 1.INSPECT MAGNET CLUTCH ASSEMBLY

E195722E02
1.021,2.74 0.688,3.302 true 0.688,3.302 0.688,3.625 false 1.167,1.906 1.302,0.969 false 1.302,0.969 1.438,0.969 false 2.656,4.229 2.521,4.229 false 1.469,0.885 1.656,1.052 0.188,0.167 10 false *1 0.615,3.646 0.792,3.813 0.177,0.167 10 false *2 2.344,4.146 2.531,4.323 0.188,0.177 10 false *3 0.052,0.042 0.25,0.219 0.198,0.177 10 false *a

a.

Check the magnet clutch operation.

i.

Confirm that the magnet clutch hub and magnet clutch rotor lock when the battery positive lead is connected to terminal 3 of the magnet clutch, and the negative lead is connected to the ground wire.

If the operation is not as specified, replace the magnet clutch assembly.



b.

Measure the resistance.


c.

Measure the resistance between terminals 1 and 2.

Standard resistance:

65 to 125 Ω at 20°C (68°F)


Text in Illustration
*1 Magnet Clutch Rotor
*2 Magnet Clutch Hub
*3 Battery
*a Component without harness connected
(Magnet Clutch Assembly)

If the resistance is not as specified, replace the cooler compressor assembly.