Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR (for 1GR-FE) › 2015.06–2016.08
RM27T0E _58 Vehicle Interior _053739 HEATING / AIR CONDITIONING _0261179 COMPRESSOR(for 1GR-FE) A

HEATING / AIR CONDITIONING  COMPRESSOR(for 1GR-FE)  DISASSEMBLY  


PROCEDURE

Hide 1.REMOVE COOLER BRACKET

E195720E01
0.079,0.075 0.287,0.267 0.208,0.192 10 *A 0.079,2.314 0.271,2.505 0.192,0.191 10 *B

a.

Detach the clamp.

Text in Illustration
*A except Model Code GRJ150L-GKFEKV, GRJ150L-GKAEKV
*B Model Code GRJ150L-GKFEKV, GRJ150L-GKAEKV


b.

Remove the screw and the cooler bracket.


Hide 88410 2.REMOVE MAGNET CLUTCH ASSEMBLY

SST
09985-00270  
09985-00260  

E205222E01
0.075,0.085 0.330,0.313 0.255,0.228 10 *A 0.075,2.343 0.330,2.570 0.255,0.228 10 *B 1.06,0.392 1.383,0.569 0.323,0.177 10 SST 1.051,2.686 1.374,2.863 0.323,0.177 10 SST 1.022,1.176 0.82,0.469 0.82,0.469 0.992,0.469 false 1,2.788 0.794,2.788 0.794,2.788 1.1,3.332 false

a.

Clamp the cooler compressor in a vise.

Text in Illustration
*A for Single Air Conditioning System
*B for Dual Air Conditioning System


b.

Using SST, hold the magnet clutch hub.

SST
09985-00270  


c.

Remove the bolt, magnet clutch hub and magnet clutch washer(s).

HINT:

There is no set number of magnet clutch washers since they are used for adjusting.



d.
I104018

Using a snap ring expander, remove the snap ring and the magnet clutch rotor.

NOTICE:

Do not damage the seal cover of the bearing when removing the snap ring.



e.

Disconnect the connector.


f.
I104019

Using a snap ring expander, remove the snap ring and magnet clutch stator.