Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR (for 2TR-FE) › 2015.06–2020.08
RM27T0E _58 Vehicle Interior _053739 HEATING / AIR CONDITIONING _0261181 COMPRESSOR(for 2TR-FE) G

HEATING / AIR CONDITIONING  COMPRESSOR(for 2TR-FE)  INSPECTION  


PROCEDURE

Hide 88410 1.INSPECT MAGNET CLUTCH ASSEMBLY

a.
E321880E09
1.688,0.646 1.51,0.646 false 1.51,0.646 0.969,1.802 false 2.667,4.125 2.042,4.125 false 0.813,2.615 0.583,3.083 true 0.594,3.052 0.594,3.771 true 0.094,0.073 0.552,0.406 0.458,0.333 9 false *a 1.719,0.563 2.177,0.896 0.458,0.333 9 false *1 0.521,3.792 0.979,4.125 0.458,0.333 9 false *2 1.885,4.042 2.344,4.375 0.458,0.333 9 false *3

Check the magnet clutch operation.

i.

Confirm that the magnet clutch hub and magnet clutch rotor lock when the battery positive lead is connected to terminal 3 of the magnet clutch and the negative lead is connected to the ground wire.

If the operation is not as specified, replace the magnet clutch assembly.

Text in Illustration
*1 Magnet Clutch Rotor
*2 Magnet Clutch Hub
*3 Battery
*a Component without harness connected
(Magnet Clutch Assembly)



b.

Measure the resistance between terminals 1 and 2.

Standard resistance:

65 to 125 Ω at 20°C (68°F)


If the resistance is not as specified, replace the cooler compressor assembly.