1.INSPECT COMPRESSOR AND MAGNETIC CLUTCH
Check the operation.
Start the engine.
Inspect the compressor pulley.
Compressor shaft rotates along with pulley.
Inspect the cooler compressor.
Disconnect the connector.
Apply battery voltage to the clutch and check operation of the clutch.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 1
Battery negative (-) → Body ground |
Magnet clutch is the engaged |
If the result is not as specified, replace the compressor.
| *1 | Magnet Clutch Rotor |
| *2 | Magnet Clutch Hub |
| *a | Component without harness connected
(Magnet Clutch Assembly) |