Home › Vehicle Interior › HEATING / AIR CONDITIONING › FRONT EVAPORATOR TEMPERATURE SENSOR
RM27T0E _58 Vehicle Interior _053739 HEATING / AIR CONDITIONING _0261185 FRONT EVAPORATOR TEMPERATURE SENSOR G

HEATING / AIR CONDITIONING  FRONT EVAPORATOR TEMPERATURE SENSOR  INSPECTION  


PROCEDURE

Hide 88625 1.INSPECT NO. 1 COOLER THERMISTOR

a.
E349945E01
0.24,0.844 0.438,0.427 0.438,0.427 0.656,0.427 false 0.688,0.313 1,0.51 0.313,0.198 10 false *1 0.073,0.063 0.385,0.26 0.313,0.198 10 false *a 0.135,1.573 0.344,1.75 0.208,0.177 10 false *b 1.76,4.49 1.969,4.667 0.208,0.177 10 false *c

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 -10°C (14°F) 7.30 to 9.10 kΩ
1 - 2 -5°C (23°F) 5.65 to 6.95 kΩ
1 - 2 0°C (32°F) 4.40 to 5.35 kΩ
1 - 2 5°C (41°F) 3.40 to 4.15 kΩ
1 - 2 10°C (50°F) 2.70 to 3.25 kΩ
1 - 2 15°C (59°F) 2.14 to 2.58 kΩ
1 - 2 20°C (68°F) 1.71 to 2.05 kΩ
1 - 2 25°C (77°F) 1.38 to 1.64 kΩ
1 - 2 30°C (86°F) 1.11 to 1.32 kΩ


HINT:

As the temperature increases, the resistance decreases (refer to the graph).


NOTICE:
·

Even slightly touching the sensor may change the resistance value. Be sure to hold the connector of the sensor.


·

When measuring, the sensor temperature must be almost the same as the ambient temperature.



If the result is not as specified, replace the No. 1 cooler thermistor.

Text in Illustration
*1 Sensor
*a Component without harness connected
(No. 1 Cooler Thermistor)
*b Resistance kΩ
*c Temperature °C (°F)