Home › Vehicle Interior › HEATING / AIR CONDITIONING › AMBIENT TEMPERATURE SENSOR › 2015.06–2019.08
RM27T0E _58 Vehicle Interior _053739 HEATING / AIR CONDITIONING _0261190 AMBIENT TEMPERATURE SENSOR G

HEATING / AIR CONDITIONING  AMBIENT TEMPERATURE SENSOR  INSPECTION  


PROCEDURE

Hide 88625P 1.INSPECT COOLER THERMISTOR (AMBIENT TEMPERATURE SENSOR)

E348865E02
2.938,0.729 2.708,0.167 2.708,0.167 2.427,0.167 false 2.271,0.073 3.156,0.26 0.885,0.188 10 false *b 0.094,1.583 1.135,1.76 1.042,0.177 10 false *c 1.708,4.448 2.542,4.635 0.833,0.188 10 false *d 0.063,0.031 0.292,0.219 0.229,0.188 10 false *a

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 10°C (50°F) 3.00 to 3.73 kΩ
15°C (59°F) 2.45 to 2.88 kΩ
20°C (68°F) 1.95 to 2.30 kΩ
25°C (77°F) 1.60 to 1.80 kΩ
30°C (86°F) 1.28 to 1.47 kΩ
35°C (95°F) 1.00 to 1.22 kΩ
40°C (104°F) 0.80 to 1.00 kΩ
45°C (113°F) 0.65 to 0.85 kΩ
50°C (122°F) 0.50 to 0.70 kΩ
55°C (131°F) 0.44 to 0.60 kΩ
60°C (140°F) 0.36 to 0.50 kΩ


HINT:

As the temperature increases, the resistance decreases (refer to the graph).


NOTICE:
·

Touching the sensor even slightly may change the resistance value. Be sure to hold the connector of the sensor.


·

When measuring the resistance, the sensor temperature must be the same as the ambient temperature.



If the result is not as specified, replace the cooler thermistor (ambient temperature sensor).

Text in Illustration
*a Component without harness connected
(Cooler Thermistor (Ambient Temperature Sensor))
*b Sensor Area
*c Resistance kΩ
*d Temperature °C (°F)